| Rexroth 3WE6A6X/EG24N9K4/B12V Directional Valves | Maximum Permissible Speed (limit Speed):71921 CD/HCP4AL; Rate Of Pressure Change:145x105x20; Maximum Volume Flow:145; Weight (approx.):105; Case volume:20; Voltage:105 mm; Displacement, geometric, per revolution:145 mm; Flow:20 mm; Determining Operating Characteristics:117.3 mm; Nominal Resistance:117.3 mm; Power:132.7 mm; Maximum rotational speed:2.3 mm; Maximum Torque:10.9 mm; Sequence Valve:3.9 mm; Control Fluid Drain:3.2 mm; Moment of inertia rotary group:1.1 mm; Control Pressure Measurement:0.6 mm; Maximum angular acceleration:26.8 mm; Pressurefree Operation:111 mm; Maximum Axial Force At Standstill:111 mm; Pilot Pressure:139 mm; Maximum Permissible Pilot Pressure:141 mm; Load Pressure:1 mm; Drive Power:0.6 mm; Drive Speed:120.6 mm; Basic dynamic load rating - C:61.8 kN; Basic static load rating - C0:69.5 kN; Fatigue load limit - Pu:2.6 kN; Limiting speed for grease lubrication:10000 r/min; Limiting speed for oil lubrication:16000 mm/min; Ball - Dw:12.7 mm; Ball - z:27; Gref:11.1 cm3; Calculation factor - f0:16.4; Preload class A - GA:230 N; Preload class B - GB:460 N; Preload class C - GC:920 N; Preload class D - GD:1840 N; Calculation factor - f:1.25; Calculation factor - f:1; Calculation factor - f2A:1; Calculation factor - f2B:1.07; Calculation factor - f2C:1.12; Calculation factor - f2D:1.18; Calculation factor - fHC:1.04; Preload class A:122 N/micron; Preload class B:168 N/micron; Preload class C:239 N/micron; Preload class D:350 N/micron; d1:117.3 mm; d2:117.3 mm; D1:132.7 mm; C1:10.9 mm; C2:3.9 mm; C3:3.2 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:111 mm; db min.:111 mm; Da max.:139 mm; Db max.:141 mm; ra max.:1 mm; rb max.:0.6 mm; dn:120.6 mm; Basic dynamic load rating C:61.8 kN; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Attainable speed for grease lubrication:10000 r/min; Attainable speed for oil-air lubrication:16000 r/min; Ball diameter Dw:12.7 mm; Number of balls z:27; Reference grease quantity Gref:11.1 cm³; Preload class A GA:230 N; Static axial stiffness, preload class A:122 N/µm; Preload class B GB:460 N; Static axial stiffness, preload class B:168 N/µm; Preload class C GC:920 N; Static axial stiffness, preload class C:239 N/µm; Preload class D GD:1840 N; Static axial stiffness, preload class D:350 N/µm; Calculation factor f:1.25; Calculation factor f1:1; Calculation factor f2A:1; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Calculation factor f2D:1.18; Calculation factor fHC:1.04; Calculation factor f0:16.4; Mass bearing:0.7 kg; |
| Rexroth 4WE6C6X/OFEG220N9K4 Directional Valves | Maximum rotational speed:71921 CD/HCP4AL; Maximum Permissible Speed (limit Speed):145x105x20; Pressurefree Operation:145; Determining Operating Characteristics:105; Rate Of Pressure Change:20; Moment of inertia rotary group:105 mm; Maximum Axial Force At Standstill:145 mm; Displacement, geometric, per revolution:20 mm; Maximum Torque:117.3 mm; Pilot Pressure:117.3 mm; Drive Power:132.7 mm; Torque:2.3 mm; Voltage:10.9 mm; Load Pressure:3.9 mm; Maximum angular acceleration:3.2 mm; Control Pressure Measurement:1.1 mm; Maximum Volume Flow:0.6 mm; Sequence Valve:26.8 mm; Control Fluid Drain:111 mm; Drive Speed:111 mm; Rotary stiffness:139 mm; Maximum Permissible Pilot Pressure:141 mm; Weight (approx.):1 mm; Flow:0.6 mm; Nominal Resistance:120.6 mm; Basic dynamic load rating - C:61.8 kN; Basic static load rating - C0:69.5 kN; Fatigue load limit - Pu:2.6 kN; Limiting speed for grease lubrication:10000 r/min; Limiting speed for oil lubrication:16000 mm/min; Ball - Dw:12.7 mm; Ball - z:27; Gref:11.1 cm3; Calculation factor - f0:16.4; Preload class A - GA:230 N; Preload class B - GB:460 N; Preload class C - GC:920 N; Preload class D - GD:1840 N; Calculation factor - f:1.25; Calculation factor - f:1; Calculation factor - f2A:1; Calculation factor - f2B:1.07; Calculation factor - f2C:1.12; Calculation factor - f2D:1.18; Calculation factor - fHC:1.04; Preload class A:122 N/micron; Preload class B:168 N/micron; Preload class C:239 N/micron; Preload class D:350 N/micron; d1:117.3 mm; d2:117.3 mm; D1:132.7 mm; C1:10.9 mm; C2:3.9 mm; C3:3.2 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:111 mm; db min.:111 mm; Da max.:139 mm; Db max.:141 mm; ra max.:1 mm; rb max.:0.6 mm; dn:120.6 mm; Basic dynamic load rating C:61.8 kN; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Attainable speed for grease lubrication:10000 r/min; Attainable speed for oil-air lubrication:16000 r/min; Ball diameter Dw:12.7 mm; Number of balls z:27; Reference grease quantity Gref:11.1 cm³; Preload class A GA:230 N; Static axial stiffness, preload class A:122 N/µm; Preload class B GB:460 N; Static axial stiffness, preload class B:168 N/µm; Preload class C GC:920 N; Static axial stiffness, preload class C:239 N/µm; Preload class D GD:1840 N; Static axial stiffness, preload class D:350 N/µm; Calculation factor f:1.25; Calculation factor f1:1; Calculation factor f2A:1; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Calculation factor f2D:1.18; Calculation factor fHC:1.04; Calculation factor f0:16.4; Mass bearing:0.7 kg; |
| Rexroth 3WE6A6X/EG24K72LQMAG24 Directional Valves | Maximum Axial Force At Standstill:71921 CD/HCP4AL; Sequence Valve:145x105x20; Maximum Volume Flow:145; Maximum Permissible Speed (limit Speed):105; Maximum Torque:20; Maximum angular acceleration:105 mm; Rate Of Pressure Change:145 mm; Pressurefree Operation:20 mm; Case volume:117.3 mm; Rotary stiffness:117.3 mm; Load Pressure:132.7 mm; Determining Operating Characteristics:2.3 mm; Drive Power:10.9 mm; Pilot Pressure:3.9 mm; Control Pressure Measurement:3.2 mm; Nominal Resistance:1.1 mm; Drive Speed:0.6 mm; Flow:26.8 mm; Power:111 mm; Control Fluid Drain:111 mm; Maximum Permissible Pilot Pressure:139 mm; Voltage:141 mm; Maximum rotational speed:1 mm; Displacement, geometric, per revolution:0.6 mm; Torque:120.6 mm; Basic dynamic load rating - C:61.8 kN; Basic static load rating - C0:69.5 kN; Fatigue load limit - Pu:2.6 kN; Limiting speed for grease lubrication:10000 r/min; Limiting speed for oil lubrication:16000 mm/min; Ball - Dw:12.7 mm; Ball - z:27; Gref:11.1 cm3; Calculation factor - f0:16.4; Preload class A - GA:230 N; Preload class B - GB:460 N; Preload class C - GC:920 N; Preload class D - GD:1840 N; Calculation factor - f:1.25; Calculation factor - f:1; Calculation factor - f2A:1; Calculation factor - f2B:1.07; Calculation factor - f2C:1.12; Calculation factor - f2D:1.18; Calculation factor - fHC:1.04; Preload class A:122 N/micron; Preload class B:168 N/micron; Preload class C:239 N/micron; Preload class D:350 N/micron; d1:117.3 mm; d2:117.3 mm; D1:132.7 mm; C1:10.9 mm; C2:3.9 mm; C3:3.2 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:111 mm; db min.:111 mm; Da max.:139 mm; Db max.:141 mm; ra max.:1 mm; rb max.:0.6 mm; dn:120.6 mm; Basic dynamic load rating C:61.8 kN; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Attainable speed for grease lubrication:10000 r/min; Attainable speed for oil-air lubrication:16000 r/min; Ball diameter Dw:12.7 mm; Number of balls z:27; Reference grease quantity Gref:11.1 cm³; Preload class A GA:230 N; Static axial stiffness, preload class A:122 N/µm; Preload class B GB:460 N; Static axial stiffness, preload class B:168 N/µm; Preload class C GC:920 N; Static axial stiffness, preload class C:239 N/µm; Preload class D GD:1840 N; Static axial stiffness, preload class D:350 N/µm; Calculation factor f:1.25; Calculation factor f1:1; Calculation factor f2A:1; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Calculation factor f2D:1.18; Calculation factor fHC:1.04; Calculation factor f0:16.4; Mass bearing:0.7 kg; |
| Rexroth 4WE6C6X/EG24N9K33LSO407 Directional Valves | Displacement, geometric, per revolution:71921 CD/HCP4AL; Power:145x105x20; Load Pressure:145; Control Fluid Drain:105; Moment of inertia rotary group:20; Control Pressure Measurement:105 mm; Weight (approx.):145 mm; Maximum Volume Flow:20 mm; Voltage:117.3 mm; Maximum Torque:117.3 mm; Sequence Valve:132.7 mm; Maximum Permissible Speed (limit Speed):2.3 mm; Rate Of Pressure Change:10.9 mm; Drive Power:3.9 mm; Maximum Axial Force At Standstill:3.2 mm; Maximum rotational speed:1.1 mm; Flow:0.6 mm; Pilot Pressure:26.8 mm; Nominal Resistance:111 mm; Case volume:111 mm; Determining Operating Characteristics:139 mm; Maximum Permissible Pilot Pressure:141 mm; Maximum angular acceleration:1 mm; Rotary stiffness:0.6 mm; Pressurefree Operation:120.6 mm; Basic dynamic load rating - C:61.8 kN; Basic static load rating - C0:69.5 kN; Fatigue load limit - Pu:2.6 kN; Limiting speed for grease lubrication:10000 r/min; Limiting speed for oil lubrication:16000 mm/min; Ball - Dw:12.7 mm; Ball - z:27; Gref:11.1 cm3; Calculation factor - f0:16.4; Preload class A - GA:230 N; Preload class B - GB:460 N; Preload class C - GC:920 N; Preload class D - GD:1840 N; Calculation factor - f:1.25; Calculation factor - f:1; Calculation factor - f2A:1; Calculation factor - f2B:1.07; Calculation factor - f2C:1.12; Calculation factor - f2D:1.18; Calculation factor - fHC:1.04; Preload class A:122 N/micron; Preload class B:168 N/micron; Preload class C:239 N/micron; Preload class D:350 N/micron; d1:117.3 mm; d2:117.3 mm; D1:132.7 mm; C1:10.9 mm; C2:3.9 mm; C3:3.2 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:111 mm; db min.:111 mm; Da max.:139 mm; Db max.:141 mm; ra max.:1 mm; rb max.:0.6 mm; dn:120.6 mm; Basic dynamic load rating C:61.8 kN; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Attainable speed for grease lubrication:10000 r/min; Attainable speed for oil-air lubrication:16000 r/min; Ball diameter Dw:12.7 mm; Number of balls z:27; Reference grease quantity Gref:11.1 cm³; Preload class A GA:230 N; Static axial stiffness, preload class A:122 N/µm; Preload class B GB:460 N; Static axial stiffness, preload class B:168 N/µm; Preload class C GC:920 N; Static axial stiffness, preload class C:239 N/µm; Preload class D GD:1840 N; Static axial stiffness, preload class D:350 N/µm; Calculation factor f:1.25; Calculation factor f1:1; Calculation factor f2A:1; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Calculation factor f2D:1.18; Calculation factor fHC:1.04; Calculation factor f0:16.4; Mass bearing:0.7 kg; |
| Rexroth 4WE6C6X/EG24NDL Directional Valves | Rotary stiffness:71921 CD/HCP4AL; Drive Speed:145x105x20; Control Fluid Drain:145; Power:105; Case volume:20; Flow:105 mm; Maximum Permissible Speed (limit Speed):145 mm; Maximum angular acceleration:20 mm; Voltage:117.3 mm; Drive Power:117.3 mm; Pilot Pressure:132.7 mm; Control Pressure Measurement:2.3 mm; Load Pressure:10.9 mm; Maximum rotational speed:3.9 mm; Maximum Axial Force At Standstill:3.2 mm; Weight (approx.):1.1 mm; Rate Of Pressure Change:0.6 mm; Maximum Torque:26.8 mm; Maximum Volume Flow:111 mm; Determining Operating Characteristics:111 mm; Sequence Valve:139 mm; Displacement, geometric, per revolution:141 mm; Nominal Resistance:1 mm; Moment of inertia rotary group:0.6 mm; Maximum Permissible Pilot Pressure:120.6 mm; Basic dynamic load rating - C:61.8 kN; Basic static load rating - C0:69.5 kN; Fatigue load limit - Pu:2.6 kN; Limiting speed for grease lubrication:10000 r/min; Limiting speed for oil lubrication:16000 mm/min; Ball - Dw:12.7 mm; Ball - z:27; Gref:11.1 cm3; Calculation factor - f0:16.4; Preload class A - GA:230 N; Preload class B - GB:460 N; Preload class C - GC:920 N; Preload class D - GD:1840 N; Calculation factor - f:1.25; Calculation factor - f:1; Calculation factor - f2A:1; Calculation factor - f2B:1.07; Calculation factor - f2C:1.12; Calculation factor - f2D:1.18; Calculation factor - fHC:1.04; Preload class A:122 N/micron; Preload class B:168 N/micron; Preload class C:239 N/micron; Preload class D:350 N/micron; d1:117.3 mm; d2:117.3 mm; D1:132.7 mm; C1:10.9 mm; C2:3.9 mm; C3:3.2 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:111 mm; db min.:111 mm; Da max.:139 mm; Db max.:141 mm; ra max.:1 mm; rb max.:0.6 mm; dn:120.6 mm; Basic dynamic load rating C:61.8 kN; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Attainable speed for grease lubrication:10000 r/min; Attainable speed for oil-air lubrication:16000 r/min; Ball diameter Dw:12.7 mm; Number of balls z:27; Reference grease quantity Gref:11.1 cm³; Preload class A GA:230 N; Static axial stiffness, preload class A:122 N/µm; Preload class B GB:460 N; Static axial stiffness, preload class B:168 N/µm; Preload class C GC:920 N; Static axial stiffness, preload class C:239 N/µm; Preload class D GD:1840 N; Static axial stiffness, preload class D:350 N/µm; Calculation factor f:1.25; Calculation factor f1:1; Calculation factor f2A:1; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Calculation factor f2D:1.18; Calculation factor fHC:1.04; Calculation factor f0:16.4; Mass bearing:0.7 kg; |
| Rexroth 4WE6D6X/EG24K33LSO407 Directional Valves | Sequence Valve:71921 CD/HCP4AL; Moment of inertia rotary group:145x105x20; Rotary stiffness:145; Nominal Resistance:105; Maximum Volume Flow:20; Power:105 mm; Drive Speed:145 mm; Rate Of Pressure Change:20 mm; Flow:117.3 mm; Control Pressure Measurement:117.3 mm; Maximum angular acceleration:132.7 mm; Case volume:2.3 mm; Displacement, geometric, per revolution:10.9 mm; Voltage:3.9 mm; Maximum Axial Force At Standstill:3.2 mm; Torque:1.1 mm; Maximum Permissible Pilot Pressure:0.6 mm; Pressurefree Operation:26.8 mm; Drive Power:111 mm; Pilot Pressure:111 mm; Maximum Permissible Speed (limit Speed):139 mm; Load Pressure:141 mm; Maximum Torque:1 mm; Determining Operating Characteristics:0.6 mm; Weight (approx.):120.6 mm; Basic dynamic load rating - C:61.8 kN; Basic static load rating - C0:69.5 kN; Fatigue load limit - Pu:2.6 kN; Limiting speed for grease lubrication:10000 r/min; Limiting speed for oil lubrication:16000 mm/min; Ball - Dw:12.7 mm; Ball - z:27; Gref:11.1 cm3; Calculation factor - f0:16.4; Preload class A - GA:230 N; Preload class B - GB:460 N; Preload class C - GC:920 N; Preload class D - GD:1840 N; Calculation factor - f:1.25; Calculation factor - f:1; Calculation factor - f2A:1; Calculation factor - f2B:1.07; Calculation factor - f2C:1.12; Calculation factor - f2D:1.18; Calculation factor - fHC:1.04; Preload class A:122 N/micron; Preload class B:168 N/micron; Preload class C:239 N/micron; Preload class D:350 N/micron; d1:117.3 mm; d2:117.3 mm; D1:132.7 mm; C1:10.9 mm; C2:3.9 mm; C3:3.2 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:111 mm; db min.:111 mm; Da max.:139 mm; Db max.:141 mm; ra max.:1 mm; rb max.:0.6 mm; dn:120.6 mm; Basic dynamic load rating C:61.8 kN; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Attainable speed for grease lubrication:10000 r/min; Attainable speed for oil-air lubrication:16000 r/min; Ball diameter Dw:12.7 mm; Number of balls z:27; Reference grease quantity Gref:11.1 cm³; Preload class A GA:230 N; Static axial stiffness, preload class A:122 N/µm; Preload class B GB:460 N; Static axial stiffness, preload class B:168 N/µm; Preload class C GC:920 N; Static axial stiffness, preload class C:239 N/µm; Preload class D GD:1840 N; Static axial stiffness, preload class D:350 N/µm; Calculation factor f:1.25; Calculation factor f1:1; Calculation factor f2A:1; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Calculation factor f2D:1.18; Calculation factor fHC:1.04; Calculation factor f0:16.4; Mass bearing:0.7 kg; |
| Rexroth 3WE6A6X/OFEG24K4 Directional Valves | Moment of inertia rotary group:71921 CD/HCP4AL; Power:145x105x20; Torque:145; Maximum angular acceleration:105; Drive Power:20; Pressurefree Operation:105 mm; Weight (approx.):145 mm; Maximum Volume Flow:20 mm; Flow:117.3 mm; Maximum Torque:117.3 mm; Rotary stiffness:132.7 mm; Control Pressure Measurement:2.3 mm; Maximum Permissible Pilot Pressure:10.9 mm; Control Fluid Drain:3.9 mm; Pilot Pressure:3.2 mm; Nominal Resistance:1.1 mm; Load Pressure:0.6 mm; Sequence Valve:26.8 mm; Determining Operating Characteristics:111 mm; Maximum Permissible Speed (limit Speed):111 mm; Case volume:139 mm; Maximum rotational speed:141 mm; Displacement, geometric, per revolution:1 mm; Drive Speed:0.6 mm; Rate Of Pressure Change:120.6 mm; Basic dynamic load rating - C:61.8 kN; Basic static load rating - C0:69.5 kN; Fatigue load limit - Pu:2.6 kN; Limiting speed for grease lubrication:10000 r/min; Limiting speed for oil lubrication:16000 mm/min; Ball - Dw:12.7 mm; Ball - z:27; Gref:11.1 cm3; Calculation factor - f0:16.4; Preload class A - GA:230 N; Preload class B - GB:460 N; Preload class C - GC:920 N; Preload class D - GD:1840 N; Calculation factor - f:1.25; Calculation factor - f:1; Calculation factor - f2A:1; Calculation factor - f2B:1.07; Calculation factor - f2C:1.12; Calculation factor - f2D:1.18; Calculation factor - fHC:1.04; Preload class A:122 N/micron; Preload class B:168 N/micron; Preload class C:239 N/micron; Preload class D:350 N/micron; d1:117.3 mm; d2:117.3 mm; D1:132.7 mm; C1:10.9 mm; C2:3.9 mm; C3:3.2 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:111 mm; db min.:111 mm; Da max.:139 mm; Db max.:141 mm; ra max.:1 mm; rb max.:0.6 mm; dn:120.6 mm; Basic dynamic load rating C:61.8 kN; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Attainable speed for grease lubrication:10000 r/min; Attainable speed for oil-air lubrication:16000 r/min; Ball diameter Dw:12.7 mm; Number of balls z:27; Reference grease quantity Gref:11.1 cm³; Preload class A GA:230 N; Static axial stiffness, preload class A:122 N/µm; Preload class B GB:460 N; Static axial stiffness, preload class B:168 N/µm; Preload class C GC:920 N; Static axial stiffness, preload class C:239 N/µm; Preload class D GD:1840 N; Static axial stiffness, preload class D:350 N/µm; Calculation factor f:1.25; Calculation factor f1:1; Calculation factor f2A:1; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Calculation factor f2D:1.18; Calculation factor fHC:1.04; Calculation factor f0:16.4; Mass bearing:0.7 kg; |
| Rexroth 3WE6A6X/EG24NK4/B10V/62 Directional Valves | Load Pressure:71921 CD/HCP4AL; Voltage:145x105x20; Power:145; Sequence Valve:105; Maximum Permissible Pilot Pressure:20; Control Pressure Measurement:105 mm; Drive Power:145 mm; Maximum angular acceleration:20 mm; Rotary stiffness:117.3 mm; Control Fluid Drain:117.3 mm; Maximum Axial Force At Standstill:132.7 mm; Moment of inertia rotary group:2.3 mm; Displacement, geometric, per revolution:10.9 mm; Torque:3.9 mm; Determining Operating Characteristics:3.2 mm; Maximum Torque:1.1 mm; Rate Of Pressure Change:0.6 mm; Flow:26.8 mm; Weight (approx.):111 mm; Nominal Resistance:111 mm; Case volume:139 mm; Pilot Pressure:141 mm; Maximum Permissible Speed (limit Speed):1 mm; Drive Speed:0.6 mm; Maximum rotational speed:120.6 mm; Basic dynamic load rating - C:61.8 kN; Basic static load rating - C0:69.5 kN; Fatigue load limit - Pu:2.6 kN; Limiting speed for grease lubrication:10000 r/min; Limiting speed for oil lubrication:16000 mm/min; Ball - Dw:12.7 mm; Ball - z:27; Gref:11.1 cm3; Calculation factor - f0:16.4; Preload class A - GA:230 N; Preload class B - GB:460 N; Preload class C - GC:920 N; Preload class D - GD:1840 N; Calculation factor - f:1.25; Calculation factor - f:1; Calculation factor - f2A:1; Calculation factor - f2B:1.07; Calculation factor - f2C:1.12; Calculation factor - f2D:1.18; Calculation factor - fHC:1.04; Preload class A:122 N/micron; Preload class B:168 N/micron; Preload class C:239 N/micron; Preload class D:350 N/micron; d1:117.3 mm; d2:117.3 mm; D1:132.7 mm; C1:10.9 mm; C2:3.9 mm; C3:3.2 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:111 mm; db min.:111 mm; Da max.:139 mm; Db max.:141 mm; ra max.:1 mm; rb max.:0.6 mm; dn:120.6 mm; Basic dynamic load rating C:61.8 kN; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Attainable speed for grease lubrication:10000 r/min; Attainable speed for oil-air lubrication:16000 r/min; Ball diameter Dw:12.7 mm; Number of balls z:27; Reference grease quantity Gref:11.1 cm³; Preload class A GA:230 N; Static axial stiffness, preload class A:122 N/µm; Preload class B GB:460 N; Static axial stiffness, preload class B:168 N/µm; Preload class C GC:920 N; Static axial stiffness, preload class C:239 N/µm; Preload class D GD:1840 N; Static axial stiffness, preload class D:350 N/µm; Calculation factor f:1.25; Calculation factor f1:1; Calculation factor f2A:1; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Calculation factor f2D:1.18; Calculation factor fHC:1.04; Calculation factor f0:16.4; Mass bearing:0.7 kg; |
| Rexroth 4WE6C6X/EW110N9K4/B10 Directional Valves | Maximum Axial Force At Standstill:71921 CD/HCP4AL; Case volume:145x105x20; Weight (approx.):145; Displacement, geometric, per revolution:105; Control Fluid Drain:20; Drive Power:105 mm; Power:145 mm; Maximum Volume Flow:20 mm; Maximum Torque:117.3 mm; Sequence Valve:117.3 mm; Drive Speed:132.7 mm; Maximum Permissible Pilot Pressure:2.3 mm; Maximum Permissible Speed (limit Speed):10.9 mm; Torque:3.9 mm; Nominal Resistance:3.2 mm; Pilot Pressure:1.1 mm; Determining Operating Characteristics:0.6 mm; Maximum rotational speed:26.8 mm; Control Pressure Measurement:111 mm; Rotary stiffness:111 mm; Voltage:139 mm; Moment of inertia rotary group:141 mm; Rate Of Pressure Change:1 mm; Maximum angular acceleration:0.6 mm; Load Pressure:120.6 mm; Basic dynamic load rating - C:61.8 kN; Basic static load rating - C0:69.5 kN; Fatigue load limit - Pu:2.6 kN; Limiting speed for grease lubrication:10000 r/min; Limiting speed for oil lubrication:16000 mm/min; Ball - Dw:12.7 mm; Ball - z:27; Gref:11.1 cm3; Calculation factor - f0:16.4; Preload class A - GA:230 N; Preload class B - GB:460 N; Preload class C - GC:920 N; Preload class D - GD:1840 N; Calculation factor - f:1.25; Calculation factor - f:1; Calculation factor - f2A:1; Calculation factor - f2B:1.07; Calculation factor - f2C:1.12; Calculation factor - f2D:1.18; Calculation factor - fHC:1.04; Preload class A:122 N/micron; Preload class B:168 N/micron; Preload class C:239 N/micron; Preload class D:350 N/micron; d1:117.3 mm; d2:117.3 mm; D1:132.7 mm; C1:10.9 mm; C2:3.9 mm; C3:3.2 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:111 mm; db min.:111 mm; Da max.:139 mm; Db max.:141 mm; ra max.:1 mm; rb max.:0.6 mm; dn:120.6 mm; Basic dynamic load rating C:61.8 kN; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Attainable speed for grease lubrication:10000 r/min; Attainable speed for oil-air lubrication:16000 r/min; Ball diameter Dw:12.7 mm; Number of balls z:27; Reference grease quantity Gref:11.1 cm³; Preload class A GA:230 N; Static axial stiffness, preload class A:122 N/µm; Preload class B GB:460 N; Static axial stiffness, preload class B:168 N/µm; Preload class C GC:920 N; Static axial stiffness, preload class C:239 N/µm; Preload class D GD:1840 N; Static axial stiffness, preload class D:350 N/µm; Calculation factor f:1.25; Calculation factor f1:1; Calculation factor f2A:1; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Calculation factor f2D:1.18; Calculation factor fHC:1.04; Calculation factor f0:16.4; Mass bearing:0.7 kg; |
| Rexroth 3WE6A6X/EW110N9K4QMBG24 Directional Valves | Sequence Valve:71921 CD/HCP4AL; Voltage:145x105x20; Maximum rotational speed:145; Torque:105; Pilot Pressure:20; Power:105 mm; Weight (approx.):145 mm; Maximum Axial Force At Standstill:20 mm; Drive Power:117.3 mm; Determining Operating Characteristics:117.3 mm; Maximum Permissible Pilot Pressure:132.7 mm; Flow:2.3 mm; Maximum Torque:10.9 mm; Maximum angular acceleration:3.9 mm; Rotary stiffness:3.2 mm; Moment of inertia rotary group:1.1 mm; Case volume:0.6 mm; Displacement, geometric, per revolution:26.8 mm; Drive Speed:111 mm; Maximum Volume Flow:111 mm; Control Pressure Measurement:139 mm; Nominal Resistance:141 mm; Rate Of Pressure Change:1 mm; Load Pressure:0.6 mm; Maximum Permissible Speed (limit Speed):120.6 mm; Basic dynamic load rating - C:61.8 kN; Basic static load rating - C0:69.5 kN; Fatigue load limit - Pu:2.6 kN; Limiting speed for grease lubrication:10000 r/min; Limiting speed for oil lubrication:16000 mm/min; Ball - Dw:12.7 mm; Ball - z:27; Gref:11.1 cm3; Calculation factor - f0:16.4; Preload class A - GA:230 N; Preload class B - GB:460 N; Preload class C - GC:920 N; Preload class D - GD:1840 N; Calculation factor - f:1.25; Calculation factor - f:1; Calculation factor - f2A:1; Calculation factor - f2B:1.07; Calculation factor - f2C:1.12; Calculation factor - f2D:1.18; Calculation factor - fHC:1.04; Preload class A:122 N/micron; Preload class B:168 N/micron; Preload class C:239 N/micron; Preload class D:350 N/micron; d1:117.3 mm; d2:117.3 mm; D1:132.7 mm; C1:10.9 mm; C2:3.9 mm; C3:3.2 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:111 mm; db min.:111 mm; Da max.:139 mm; Db max.:141 mm; ra max.:1 mm; rb max.:0.6 mm; dn:120.6 mm; Basic dynamic load rating C:61.8 kN; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Attainable speed for grease lubrication:10000 r/min; Attainable speed for oil-air lubrication:16000 r/min; Ball diameter Dw:12.7 mm; Number of balls z:27; Reference grease quantity Gref:11.1 cm³; Preload class A GA:230 N; Static axial stiffness, preload class A:122 N/µm; Preload class B GB:460 N; Static axial stiffness, preload class B:168 N/µm; Preload class C GC:920 N; Static axial stiffness, preload class C:239 N/µm; Preload class D GD:1840 N; Static axial stiffness, preload class D:350 N/µm; Calculation factor f:1.25; Calculation factor f1:1; Calculation factor f2A:1; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Calculation factor f2D:1.18; Calculation factor fHC:1.04; Calculation factor f0:16.4; Mass bearing:0.7 kg; |
| Rexroth 4WE6D6X/EG180N9K4 Directional Valves | Weight (approx.):71921 CD/HCP4AL; Determining Operating Characteristics:145x105x20; Drive Speed:145; Maximum Torque:105; Nominal Resistance:20; Maximum Permissible Speed (limit Speed):105 mm; Case volume:145 mm; Drive Power:20 mm; Control Fluid Drain:117.3 mm; Rotary stiffness:117.3 mm; Torque:132.7 mm; Maximum Volume Flow:2.3 mm; Load Pressure:10.9 mm; Sequence Valve:3.9 mm; Flow:3.2 mm; Pressurefree Operation:1.1 mm; Control Pressure Measurement:0.6 mm; Rate Of Pressure Change:26.8 mm; Pilot Pressure:111 mm; Maximum Axial Force At Standstill:111 mm; Maximum rotational speed:139 mm; Power:141 mm; Maximum Permissible Pilot Pressure:1 mm; Maximum angular acceleration:0.6 mm; Voltage:120.6 mm; Basic dynamic load rating - C:61.8 kN; Basic static load rating - C0:69.5 kN; Fatigue load limit - Pu:2.6 kN; Limiting speed for grease lubrication:10000 r/min; Limiting speed for oil lubrication:16000 mm/min; Ball - Dw:12.7 mm; Ball - z:27; Gref:11.1 cm3; Calculation factor - f0:16.4; Preload class A - GA:230 N; Preload class B - GB:460 N; Preload class C - GC:920 N; Preload class D - GD:1840 N; Calculation factor - f:1.25; Calculation factor - f:1; Calculation factor - f2A:1; Calculation factor - f2B:1.07; Calculation factor - f2C:1.12; Calculation factor - f2D:1.18; Calculation factor - fHC:1.04; Preload class A:122 N/micron; Preload class B:168 N/micron; Preload class C:239 N/micron; Preload class D:350 N/micron; d1:117.3 mm; d2:117.3 mm; D1:132.7 mm; C1:10.9 mm; C2:3.9 mm; C3:3.2 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:111 mm; db min.:111 mm; Da max.:139 mm; Db max.:141 mm; ra max.:1 mm; rb max.:0.6 mm; dn:120.6 mm; Basic dynamic load rating C:61.8 kN; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Attainable speed for grease lubrication:10000 r/min; Attainable speed for oil-air lubrication:16000 r/min; Ball diameter Dw:12.7 mm; Number of balls z:27; Reference grease quantity Gref:11.1 cm³; Preload class A GA:230 N; Static axial stiffness, preload class A:122 N/µm; Preload class B GB:460 N; Static axial stiffness, preload class B:168 N/µm; Preload class C GC:920 N; Static axial stiffness, preload class C:239 N/µm; Preload class D GD:1840 N; Static axial stiffness, preload class D:350 N/µm; Calculation factor f:1.25; Calculation factor f1:1; Calculation factor f2A:1; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Calculation factor f2D:1.18; Calculation factor fHC:1.04; Calculation factor f0:16.4; Mass bearing:0.7 kg; |
| Rexroth 4WE6C6X/EG12NK4 Directional Valves | Displacement, geometric, per revolution:71921 CD/HCP4AL; Drive Speed:145x105x20; Control Pressure Measurement:145; Maximum Torque:105; Weight (approx.):20; Voltage:105 mm; Pressurefree Operation:145 mm; Maximum rotational speed:20 mm; Control Fluid Drain:117.3 mm; Drive Power:117.3 mm; Torque:132.7 mm; Rotary stiffness:2.3 mm; Load Pressure:10.9 mm; Nominal Resistance:3.9 mm; Power:3.2 mm; Maximum Volume Flow:1.1 mm; Sequence Valve:0.6 mm; Maximum Permissible Pilot Pressure:26.8 mm; Pilot Pressure:111 mm; Flow:111 mm; Maximum angular acceleration:139 mm; Determining Operating Characteristics:141 mm; Rate Of Pressure Change:1 mm; Maximum Axial Force At Standstill:0.6 mm; Maximum Permissible Speed (limit Speed):120.6 mm; Basic dynamic load rating - C:61.8 kN; Basic static load rating - C0:69.5 kN; Fatigue load limit - Pu:2.6 kN; Limiting speed for grease lubrication:10000 r/min; Limiting speed for oil lubrication:16000 mm/min; Ball - Dw:12.7 mm; Ball - z:27; Gref:11.1 cm3; Calculation factor - f0:16.4; Preload class A - GA:230 N; Preload class B - GB:460 N; Preload class C - GC:920 N; Preload class D - GD:1840 N; Calculation factor - f:1.25; Calculation factor - f:1; Calculation factor - f2A:1; Calculation factor - f2B:1.07; Calculation factor - f2C:1.12; Calculation factor - f2D:1.18; Calculation factor - fHC:1.04; Preload class A:122 N/micron; Preload class B:168 N/micron; Preload class C:239 N/micron; Preload class D:350 N/micron; d1:117.3 mm; d2:117.3 mm; D1:132.7 mm; C1:10.9 mm; C2:3.9 mm; C3:3.2 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; da min.:111 mm; db min.:111 mm; Da max.:139 mm; Db max.:141 mm; ra max.:1 mm; rb max.:0.6 mm; dn:120.6 mm; Basic dynamic load rating C:61.8 kN; Basic static load rating C0:69.5 kN; Fatigue load limit Pu:2.6 kN; Attainable speed for grease lubrication:10000 r/min; Attainable speed for oil-air lubrication:16000 r/min; Ball diameter Dw:12.7 mm; Number of balls z:27; Reference grease quantity Gref:11.1 cm³; Preload class A GA:230 N; Static axial stiffness, preload class A:122 N/µm; Preload class B GB:460 N; Static axial stiffness, preload class B:168 N/µm; Preload class C GC:920 N; Static axial stiffness, preload class C:239 N/µm; Preload class D GD:1840 N; Static axial stiffness, preload class D:350 N/µm; Calculation factor f:1.25; Calculation factor f1:1; Calculation factor f2A:1; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Calculation factor f2D:1.18; Calculation factor fHC:1.04; Calculation factor f0:16.4; Mass bearing:0.7 kg; |