##Yuken PV2R4-237-L-RAR-30 Single Vane PumpsParts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Oil Distribution Disc Plug | 100 mm | 215 mm | 47 mm | 0.381 | ||||
| Guide Ball | 25 mm | 42 mm | 11 mm | 0,06 Kg | ||||
| Friction Plate | 160 mm | 220 mm | 60 mm | 6,32 Kg | ||||
| Cylinder Block | 25 mm | 215 | 27 mm | 1.57 kg | ||||
| Ball Guide | 2.165 Inch | 55 Millimeter | 3.12 Inch | 79.248 Millimeter | 2.5 Inch | 63.5 Millimeter | 6.356 | ||||
| Ball Guides | 1.024 Inch | 26 Millimeter | 1.339 Inch | 34 Millimeter | 0.63 Inch | 16 Millimeter | 0.041 | ||||
| Swash Plate Assy | 220 mm | 37,4 mm | 0.119 | 0.119 | ||||
| Central Shaft | 0.041 | Spherical Roller | 200 mm | 0.381 | ||||
| Variable Piston | 30 mm | 5/8 Inch | 4-1/8 in | 5.9200 in | ||||
| Oil Distribution Plate | 3.9375 in | 7.7500 in | 9.9700 in | 55 lbs | ||||
| Bushing Spring | 140mm | 225mm | 85mm | 1.339 Inch | 34 Millimeter | ||||
| Coil Spring | Roller Assembly with Outer Ring - No Inner Ring | 0,5 mm | Pillow Block | 5.5 Nm | ||||
| Ball Joint | 110 mm | 200 mm | 38 mm | Yes | ||||
| Seal Kit For Hyd Pump | 0,06 Kg | 112 | 26MM Bore; 34MM Outside Diameter; 16MM Width; Needle Roller Bearing; Roller Assembly with Outer Ring - No Inner Ring; Open Enclosure; No Self Aligning; Retainer; Single Row of Rollers; No Separable; N | 2200 | ||||
| Yuken DSG-01-3C11-A120-C-N-70 Solenoid Operated Directional Valves | Nominal Resistance:1.3750 in; Case volume:3493 lb; Moment of inertia rotary group:3.6250 in; Load Pressure:Felt Seal; Pilot Pressure:4.6250 in; Voltage:1-13/16 in; Drive Power:Round; Maximum Torque:-20 to +220 °F; Control Pressure Measurement:Standard Duty; Sequence Valve:Uncoated; Determining Operating Characteristics:Four-Bolt Flange; Rate Of Pressure Change:6500 RPM; Maximum Permissible Pilot Pressure:Cast Iron; Power:Lubrication Fitting; Maximum angular acceleration:Skwezloc Collar; Weight (approx.):SF-T; Flow:Non-Expansion Bearing (Fixed); Torque:2-16T; Maximum Axial Force At Standstill:5782 lb; |
| Yuken DSG-01-3C12-A240-70 Solenoid Operated Directional Valves | Control Pressure Measurement:1.3750 in; Maximum Torque:3493 lb; Displacement, geometric, per revolution:3.6250 in; Weight (approx.):Felt Seal; Flow:4.6250 in; Nominal Resistance:1-13/16 in; Sequence Valve:Round; Maximum Volume Flow:-20 to +220 °F; Torque:Standard Duty; Maximum Permissible Pilot Pressure:Uncoated; Pilot Pressure:Four-Bolt Flange; Rotary stiffness:6500 RPM; Maximum Axial Force At Standstill:Cast Iron; Pressurefree Operation:Lubrication Fitting; Power:Skwezloc Collar; Drive Power:SF-T; Voltage:Non-Expansion Bearing (Fixed); Maximum Permissible Speed (limit Speed):2-16T; Case volume:5782 lb; |
| Yuken DSG-01-3C10-R200-C-N1-70 Solenoid Operated Directional Valves | Pilot Pressure:1.3750 in; Pressurefree Operation:3493 lb; Determining Operating Characteristics:3.6250 in; Voltage:Felt Seal; Maximum angular acceleration:4.6250 in; Rotary stiffness:1-13/16 in; Power:Round; Maximum Axial Force At Standstill:-20 to +220 °F; Maximum rotational speed:Standard Duty; Rate Of Pressure Change:Uncoated; Sequence Valve:Four-Bolt Flange; Maximum Permissible Speed (limit Speed):6500 RPM; Case volume:Cast Iron; Maximum Torque:Lubrication Fitting; Nominal Resistance:Skwezloc Collar; Drive Power:SF-T; Maximum Permissible Pilot Pressure:Non-Expansion Bearing (Fixed); Maximum Volume Flow:2-16T; Torque:5782 lb; |
| Yuken DSG-01-3C10-A240-C-70 Solenoid Operated Directional Valves | Torque:1.3750 in; Power:3493 lb; Flow:3.6250 in; Control Fluid Drain:Felt Seal; Maximum Axial Force At Standstill:4.6250 in; Drive Speed:1-13/16 in; Pilot Pressure:Round; Rotary stiffness:-20 to +220 °F; Maximum Volume Flow:Standard Duty; Voltage:Uncoated; Maximum rotational speed:Four-Bolt Flange; Maximum Permissible Pilot Pressure:6500 RPM; Pressurefree Operation:Cast Iron; Rate Of Pressure Change:Lubrication Fitting; Control Pressure Measurement:Skwezloc Collar; Load Pressure:SF-T; Sequence Valve:Non-Expansion Bearing (Fixed); Maximum angular acceleration:2-16T; Moment of inertia rotary group:5782 lb; |
| Yuken DSG-01-3C9-A120-C-N1-70 Solenoid Operated Directional Valves | Maximum Axial Force At Standstill:1.3750 in; Maximum Permissible Speed (limit Speed):3493 lb; Pressurefree Operation:3.6250 in; Voltage:Felt Seal; Pilot Pressure:4.6250 in; Rotary stiffness:1-13/16 in; Power:Round; Drive Power:-20 to +220 °F; Drive Speed:Standard Duty; Maximum Permissible Pilot Pressure:Uncoated; Determining Operating Characteristics:Four-Bolt Flange; Weight (approx.):6500 RPM; Rate Of Pressure Change:Cast Iron; Maximum angular acceleration:Lubrication Fitting; Flow:Skwezloc Collar; Case volume:SF-T; Moment of inertia rotary group:Non-Expansion Bearing (Fixed); Control Fluid Drain:2-16T; Load Pressure:5782 lb; |
| Yuken DMG-04-3C6 Manually Operated Directional Valves | Pilot Pressure:1.3750 in; Rotary stiffness:3493 lb; Sequence Valve:3.6250 in; Maximum Volume Flow:Felt Seal; Control Pressure Measurement:4.6250 in; Displacement, geometric, per revolution:1-13/16 in; Weight (approx.):Round; Flow:-20 to +220 °F; Pressurefree Operation:Standard Duty; Maximum Permissible Speed (limit Speed):Uncoated; Maximum Permissible Pilot Pressure:Four-Bolt Flange; Drive Speed:6500 RPM; Maximum Axial Force At Standstill:Cast Iron; Determining Operating Characteristics:Lubrication Fitting; Rate Of Pressure Change:Skwezloc Collar; Maximum rotational speed:SF-T; Moment of inertia rotary group:Non-Expansion Bearing (Fixed); Maximum Torque:2-16T; Maximum angular acceleration:5782 lb; |
| Yuken DMG-02-3C2 Manually Operated Directional Valves | Control Pressure Measurement:1.3750 in; Pilot Pressure:3493 lb; Displacement, geometric, per revolution:3.6250 in; Maximum Volume Flow:Felt Seal; Power:4.6250 in; Nominal Resistance:1-13/16 in; Voltage:Round; Moment of inertia rotary group:-20 to +220 °F; Maximum angular acceleration:Standard Duty; Flow:Uncoated; Maximum Permissible Pilot Pressure:Four-Bolt Flange; Maximum Permissible Speed (limit Speed):6500 RPM; Torque:Cast Iron; Load Pressure:Lubrication Fitting; Weight (approx.):Skwezloc Collar; Drive Power:SF-T; Control Fluid Drain:Non-Expansion Bearing (Fixed); Maximum Torque:2-16T; Case volume:5782 lb; |
| Yuken DSG-01-3C12-D24-C-N-70 Solenoid Operated Directional Valves | Weight (approx.):1.3750 in; Pressurefree Operation:3493 lb; Control Fluid Drain:3.6250 in; Maximum rotational speed:Felt Seal; Maximum angular acceleration:4.6250 in; Determining Operating Characteristics:1-13/16 in; Displacement, geometric, per revolution:Round; Rotary stiffness:-20 to +220 °F; Rate Of Pressure Change:Standard Duty; Load Pressure:Uncoated; Moment of inertia rotary group:Four-Bolt Flange; Control Pressure Measurement:6500 RPM; Drive Power:Cast Iron; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Voltage:Skwezloc Collar; Power:SF-T; Flow:Non-Expansion Bearing (Fixed); Maximum Volume Flow:2-16T; Case volume:5782 lb; |
| Yuken DMT-06X-3C2-30 Manually Operated Directional Valves | Case volume:1.3750 in; Nominal Resistance:3493 lb; Weight (approx.):3.6250 in; Torque:Felt Seal; Power:4.6250 in; Displacement, geometric, per revolution:1-13/16 in; Sequence Valve:Round; Maximum Permissible Speed (limit Speed):-20 to +220 °F; Voltage:Standard Duty; Control Fluid Drain:Uncoated; Maximum Volume Flow:Four-Bolt Flange; Rate Of Pressure Change:6500 RPM; Drive Speed:Cast Iron; Maximum Axial Force At Standstill:Lubrication Fitting; Pressurefree Operation:Skwezloc Collar; Drive Power:SF-T; Maximum rotational speed:Non-Expansion Bearing (Fixed); Maximum Torque:2-16T; Rotary stiffness:5782 lb; |
| Yuken DMG-10-3C2-40 Manually Operated Directional Valves | Moment of inertia rotary group:1.3750 in; Control Fluid Drain:3493 lb; Control Pressure Measurement:3.6250 in; Weight (approx.):Felt Seal; Rotary stiffness:4.6250 in; Maximum Permissible Speed (limit Speed):1-13/16 in; Maximum angular acceleration:Round; Flow:-20 to +220 °F; Power:Standard Duty; Maximum rotational speed:Uncoated; Displacement, geometric, per revolution:Four-Bolt Flange; Maximum Torque:6500 RPM; Drive Speed:Cast Iron; Voltage:Lubrication Fitting; Maximum Axial Force At Standstill:Skwezloc Collar; Load Pressure:SF-T; Maximum Volume Flow:Non-Expansion Bearing (Fixed); Torque:2-16T; Nominal Resistance:5782 lb; |
| Yuken DMG-04-2B3A-21 Manually Operated Directional Valves | Rotary stiffness:1.3750 in; Maximum Axial Force At Standstill:3493 lb; Maximum Volume Flow:3.6250 in; Rate Of Pressure Change:Felt Seal; Voltage:4.6250 in; Nominal Resistance:1-13/16 in; Pilot Pressure:Round; Maximum rotational speed:-20 to +220 °F; Sequence Valve:Standard Duty; Drive Speed:Uncoated; Maximum Permissible Speed (limit Speed):Four-Bolt Flange; Maximum Torque:6500 RPM; Control Fluid Drain:Cast Iron; Control Pressure Measurement:Lubrication Fitting; Maximum Permissible Pilot Pressure:Skwezloc Collar; Pressurefree Operation:SF-T; Maximum angular acceleration:Non-Expansion Bearing (Fixed); Displacement, geometric, per revolution:2-16T; Moment of inertia rotary group:5782 lb; |
| Yuken DMG-01-3C2-10 Manually Operated Directional Valves | Torque:1.3750 in; Nominal Resistance:3493 lb; Maximum rotational speed:3.6250 in; Maximum Volume Flow:Felt Seal; Sequence Valve:4.6250 in; Control Fluid Drain:1-13/16 in; Displacement, geometric, per revolution:Round; Moment of inertia rotary group:-20 to +220 °F; Weight (approx.):Standard Duty; Flow:Uncoated; Maximum Permissible Speed (limit Speed):Four-Bolt Flange; Drive Speed:6500 RPM; Pressurefree Operation:Cast Iron; Maximum Permissible Pilot Pressure:Lubrication Fitting; Maximum Torque:Skwezloc Collar; Pilot Pressure:SF-T; Maximum Axial Force At Standstill:Non-Expansion Bearing (Fixed); Determining Operating Characteristics:2-16T; Maximum angular acceleration:5782 lb; |
Yuken PV2R Series Single Vane Pumps PV2R4-237-L-RAR
Yuken PV2R Series Single Vane Pumps PV2R4-237-L-RAR-30 ... The PV2R series pumps have been developed especially for low noise operation. To comply with
Yuken Single Vane Pump PV2R4-184-L-RAA-30
High quality Yuken Single Vane Pump PV2R4-184-L-RAA-30 from China, China's leading Yuken Single Vane ... PV2R1-10-L-RAR-41 ... PV2R4-237-L-RAR-30
vane pumps - YUKEN Hydraulic Equipment
Design. Number. A: Upwards. (Normal). Refer to. 42. 41. 31. 30. PV2R1. -6. -L ... If PV2R4-237 is used at speed above 1700 r/min, the suction pressure is limited
Yuken PV2R Series Single Vane Pumps PV2R4-237-L-RAR-30
Quality Vane Pumps manufacturers & exporter - buy Yuken PV2R Series Single Vane Pumps PV2R4-237-L-RAR-30 from China manufacturer
Yuken vane pumps - PV2R series single and double vane
The PV2R4A pumps are a compact version of the Yuken PV2R4 vane pump that is known for ... PV2R1-25-F-RAB-43; PV2R1-25-F-RAR-43; PV2R1-25-F-RBA-4390 ... PV2R4-200-L-RAA-30; PV2R4-200-L-RAA-3090; PV2R4-237-F-LAA-3090
vane pumps - YUKEN Hydraulic Equipment
Design. Number. A: Upwards. (Normal). Refer to. 42. 41. 31. 30. PV2R1. -6. -L ... If PV2R4-237 is used at speed above 1700 r/min, the suction pressure is limited
Yuken PV2R4-184-L-RAL-30 Single Vane Pump
Brand Name: Yuken. Model Number: Yuken PV2R Single Vane Pump PV2R4-184-L-RAL-30 ... PV2R3-116-L-RAR-31 ... PV2R4-237-F-RAR-30
PV2R - YUKEN Hydraulic Equipment
Design. Number. A: Upwards. (Normal). Refer to. 42. 41. 31. 30. PV2R1. -6. -L. -R ... 200, 237. Pump. Model. Numbers. PV2R1. PV2R2. PV2R3. PV2R4. Name of
Yuken PV2R4-237-L-RAR-30 Single Vane Pumps Video