##Yuken CPDT-10-E-50-50 Pilot Controlled Check ValvesParts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Swash Plate Assy | 7,000 mm | 16,000 mm | 8,900 mm | 8,900 mm | ||||
| Set Plate | 380 mm | 520 mm | 7200 kN | 190 mm | ||||
| Separator | 7000 lb | 3,175 mm | 30 | 1.437 in | ||||
| Push Rod | 1.575 Inch | 40 Millimeter | 3.15 Inch | 80 Millimeter | 3,571 | 126.1 | ||||
| Press Pin | 1.1875 in | 4.81 to 5.2 in | Precision | 2.63 in | ||||
| Guide Ball | 0.5000 in | 8,900 mm | 130 000 r/min | Solid | ||||
| Bearings | 0.7520 in | 1 1/2 in | 0.005 kN | 7/8 in | ||||
| Piston Sets | 180 | 3.8750 in | 665 | Dual Lip, Spring Loaded Without Inner Case | ||||
| Ball Guide | 8 in | 13 | Dual Lip, Spring Loaded Without Inner Case | No Seals | ||||
| Ball Guides | 3,175 mm | 9,525 mm | 3,571 mm | 3,571 mm | ||||
| Swash Plate Assemblies | Round | 700 lb | Bearing | 1.12 | ||||
| Retainer Plate | 7336ADF | 0.170 in | 0.0011 kg | 3000 fpm | ||||
| Yuken DSG-01-3C12-D24-C-N-70 Solenoid Operated Directional Valves | Rate Of Pressure Change:Two-Bolt Base; Maximum Torque:3.2500 in; Case volume:1.1250 in; Torque:Uncoated; Drive Power:Round; Maximum rotational speed:1-1/2 in; Moment of inertia rotary group:1.6875 in; Flow:-30 to +300 °F; Determining Operating Characteristics:Normal Duty; Maximum Permissible Pilot Pressure:1-3/4 in; Displacement, geometric, per revolution:Cast Iron; Maximum Volume Flow:4-5/16 to 4-15/16 in; Nominal Resistance:Set Screw; Pressurefree Operation:4500 RPM; Weight (approx.):Contact with Flinger; Sequence Valve:Lubrication Fitting; Pilot Pressure:Non-Expansion Bearing (Fixed); Maximum angular acceleration:SH; Maximum Axial Force At Standstill:6.2500 in; |
| Yuken DMG-04-2B3A-21 Manually Operated Directional Valves | Torque:Two-Bolt Base; Case volume:3.2500 in; Control Fluid Drain:1.1250 in; Maximum Permissible Pilot Pressure:Uncoated; Maximum rotational speed:Round; Weight (approx.):1-1/2 in; Maximum Axial Force At Standstill:1.6875 in; Voltage:-30 to +300 °F; Drive Speed:Normal Duty; Maximum angular acceleration:1-3/4 in; Flow:Cast Iron; Displacement, geometric, per revolution:4-5/16 to 4-15/16 in; Pressurefree Operation:Set Screw; Determining Operating Characteristics:4500 RPM; Power:Contact with Flinger; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Nominal Resistance:Non-Expansion Bearing (Fixed); Moment of inertia rotary group:SH; Load Pressure:6.2500 in; |
| Yuken DSG-01-3C10-R200-C-N1-70 Solenoid Operated Directional Valves | Maximum Permissible Speed (limit Speed):Two-Bolt Base; Control Pressure Measurement:3.2500 in; Power:1.1250 in; Moment of inertia rotary group:Uncoated; Case volume:Round; Rotary stiffness:1-1/2 in; Displacement, geometric, per revolution:1.6875 in; Nominal Resistance:-30 to +300 °F; Torque:Normal Duty; Drive Power:1-3/4 in; Drive Speed:Cast Iron; Pilot Pressure:4-5/16 to 4-15/16 in; Determining Operating Characteristics:Set Screw; Voltage:4500 RPM; Load Pressure:Contact with Flinger; Control Fluid Drain:Lubrication Fitting; Maximum Axial Force At Standstill:Non-Expansion Bearing (Fixed); Pressurefree Operation:SH; Weight (approx.):6.2500 in; |
| Yuken DMG-04-3C6 Manually Operated Directional Valves | Voltage:Two-Bolt Base; Sequence Valve:3.2500 in; Maximum Axial Force At Standstill:1.1250 in; Control Pressure Measurement:Uncoated; Determining Operating Characteristics:Round; Rate Of Pressure Change:1-1/2 in; Weight (approx.):1.6875 in; Drive Power:-30 to +300 °F; Maximum Permissible Pilot Pressure:Normal Duty; Load Pressure:1-3/4 in; Maximum rotational speed:Cast Iron; Control Fluid Drain:4-5/16 to 4-15/16 in; Rotary stiffness:Set Screw; Drive Speed:4500 RPM; Power:Contact with Flinger; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Pilot Pressure:Non-Expansion Bearing (Fixed); Torque:SH; Pressurefree Operation:6.2500 in; |
| Yuken DMG-02-3C2 Manually Operated Directional Valves | Maximum Torque:Two-Bolt Base; Pressurefree Operation:3.2500 in; Maximum Permissible Pilot Pressure:1.1250 in; Rotary stiffness:Uncoated; Maximum Axial Force At Standstill:Round; Load Pressure:1-1/2 in; Control Fluid Drain:1.6875 in; Sequence Valve:-30 to +300 °F; Torque:Normal Duty; Maximum rotational speed:1-3/4 in; Drive Power:Cast Iron; Determining Operating Characteristics:4-5/16 to 4-15/16 in; Maximum angular acceleration:Set Screw; Nominal Resistance:4500 RPM; Drive Speed:Contact with Flinger; Power:Lubrication Fitting; Moment of inertia rotary group:Non-Expansion Bearing (Fixed); Voltage:SH; Control Pressure Measurement:6.2500 in; |
| Yuken DMG-10-3C2-40 Manually Operated Directional Valves | Drive Power:Two-Bolt Base; Flow:3.2500 in; Maximum angular acceleration:1.1250 in; Maximum Axial Force At Standstill:Uncoated; Determining Operating Characteristics:Round; Control Fluid Drain:1-1/2 in; Rotary stiffness:1.6875 in; Voltage:-30 to +300 °F; Nominal Resistance:Normal Duty; Maximum Torque:1-3/4 in; Control Pressure Measurement:Cast Iron; Moment of inertia rotary group:4-5/16 to 4-15/16 in; Maximum Permissible Speed (limit Speed):Set Screw; Drive Speed:4500 RPM; Power:Contact with Flinger; Pilot Pressure:Lubrication Fitting; Load Pressure:Non-Expansion Bearing (Fixed); Displacement, geometric, per revolution:SH; Rate Of Pressure Change:6.2500 in; |
| Yuken DSG-01-3C12-A240-70 Solenoid Operated Directional Valves | Voltage:Two-Bolt Base; Maximum angular acceleration:3.2500 in; Weight (approx.):1.1250 in; Case volume:Uncoated; Maximum Axial Force At Standstill:Round; Nominal Resistance:1-1/2 in; Drive Power:1.6875 in; Rotary stiffness:-30 to +300 °F; Control Pressure Measurement:Normal Duty; Drive Speed:1-3/4 in; Rate Of Pressure Change:Cast Iron; Maximum Permissible Pilot Pressure:4-5/16 to 4-15/16 in; Maximum Volume Flow:Set Screw; Flow:4500 RPM; Moment of inertia rotary group:Contact with Flinger; Displacement, geometric, per revolution:Lubrication Fitting; Power:Non-Expansion Bearing (Fixed); Pilot Pressure:SH; Load Pressure:6.2500 in; |
| Yuken DMT-06X-3C2-30 Manually Operated Directional Valves | Flow:Two-Bolt Base; Drive Speed:3.2500 in; Rotary stiffness:1.1250 in; Case volume:Uncoated; Sequence Valve:Round; Maximum rotational speed:1-1/2 in; Maximum Torque:1.6875 in; Power:-30 to +300 °F; Determining Operating Characteristics:Normal Duty; Moment of inertia rotary group:1-3/4 in; Rate Of Pressure Change:Cast Iron; Control Fluid Drain:4-5/16 to 4-15/16 in; Drive Power:Set Screw; Maximum Axial Force At Standstill:4500 RPM; Pilot Pressure:Contact with Flinger; Control Pressure Measurement:Lubrication Fitting; Torque:Non-Expansion Bearing (Fixed); Maximum Permissible Pilot Pressure:SH; Maximum angular acceleration:6.2500 in; |
| Yuken DSG-01-3C9-A120-C-N1-70 Solenoid Operated Directional Valves | Torque:Two-Bolt Base; Pressurefree Operation:3.2500 in; Maximum angular acceleration:1.1250 in; Maximum Torque:Uncoated; Control Fluid Drain:Round; Maximum Volume Flow:1-1/2 in; Maximum Permissible Speed (limit Speed):1.6875 in; Sequence Valve:-30 to +300 °F; Weight (approx.):Normal Duty; Moment of inertia rotary group:1-3/4 in; Displacement, geometric, per revolution:Cast Iron; Maximum Axial Force At Standstill:4-5/16 to 4-15/16 in; Pilot Pressure:Set Screw; Power:4500 RPM; Flow:Contact with Flinger; Rotary stiffness:Lubrication Fitting; Maximum Permissible Pilot Pressure:Non-Expansion Bearing (Fixed); Drive Power:SH; Case volume:6.2500 in; |
| Yuken DSG-01-3C11-A120-C-N-70 Solenoid Operated Directional Valves | Sequence Valve:Two-Bolt Base; Maximum Axial Force At Standstill:3.2500 in; Displacement, geometric, per revolution:1.1250 in; Maximum Torque:Uncoated; Maximum angular acceleration:Round; Rate Of Pressure Change:1-1/2 in; Nominal Resistance:1.6875 in; Determining Operating Characteristics:-30 to +300 °F; Drive Power:Normal Duty; Pilot Pressure:1-3/4 in; Weight (approx.):Cast Iron; Moment of inertia rotary group:4-5/16 to 4-15/16 in; Control Pressure Measurement:Set Screw; Maximum Permissible Pilot Pressure:4500 RPM; Load Pressure:Contact with Flinger; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Maximum Volume Flow:Non-Expansion Bearing (Fixed); Voltage:SH; Rotary stiffness:6.2500 in; |
| Yuken DMG-01-3C2-10 Manually Operated Directional Valves | Rotary stiffness:Two-Bolt Base; Case volume:3.2500 in; Maximum Torque:1.1250 in; Determining Operating Characteristics:Uncoated; Nominal Resistance:Round; Pressurefree Operation:1-1/2 in; Drive Power:1.6875 in; Maximum rotational speed:-30 to +300 °F; Maximum Axial Force At Standstill:Normal Duty; Moment of inertia rotary group:1-3/4 in; Maximum angular acceleration:Cast Iron; Control Fluid Drain:4-5/16 to 4-15/16 in; Drive Speed:Set Screw; Voltage:4500 RPM; Maximum Volume Flow:Contact with Flinger; Rate Of Pressure Change:Lubrication Fitting; Flow:Non-Expansion Bearing (Fixed); Maximum Permissible Pilot Pressure:SH; Pilot Pressure:6.2500 in; |
| Yuken DSG-01-3C10-A240-C-70 Solenoid Operated Directional Valves | Maximum Volume Flow:Two-Bolt Base; Maximum Torque:3.2500 in; Maximum angular acceleration:1.1250 in; Rate Of Pressure Change:Uncoated; Maximum rotational speed:Round; Maximum Axial Force At Standstill:1-1/2 in; Control Fluid Drain:1.6875 in; Flow:-30 to +300 °F; Maximum Permissible Speed (limit Speed):Normal Duty; Displacement, geometric, per revolution:1-3/4 in; Determining Operating Characteristics:Cast Iron; Case volume:4-5/16 to 4-15/16 in; Control Pressure Measurement:Set Screw; Nominal Resistance:4500 RPM; Pilot Pressure:Contact with Flinger; Weight (approx.):Lubrication Fitting; Drive Power:Non-Expansion Bearing (Fixed); Moment of inertia rotary group:SH; Power:6.2500 in; |
new yuken valve CPDG-10-04-50 | eBay
Yuken CPT, CPF, CPDG, CPDF, CPDT Part Numbers. ... CPDT-06-E-50-5090; CPDT-10-20-5090; CPDT-10-E-50-5090; CPF-10-E-20-50; CPF-16-30-5090
Check/Pilot Controlled Check Valves - YUKEN Hydraulic
10. 50 100 200. 500 1000. 20. 5. Max. Operating. Pressure. MPa (PSI). Graphic. Symbols ... These valves allow free flow in one direction and prevent flow in the reverse direction. Cracking ... -50/5080/5090. CPT/CPDT-10- - -50/5080/5090
Houston Hydraulic > Yuken > Valves > Check Valves
Decompression Type P.O. Check Valves - Yuken CPD Series ... CPDG 10-50-50. Yuken 70 PSI Pilot Control Check. ... CPDT-10-E-50-5090. 70 PSI Pilot Control
YUKEN Hydraulic Equipment
E: External. Drain. Threaded Connection. Model Numbers. Type of Connection. CPT/CPDT-03- - -50. CPT/CPDT-06- - -50. CPT/CPDT-10- - -50. CPG/CPDG-03-
Yuken CPT/CPG/CPDT/CPDG Pilot Controlled Check Valves
Quality Yuken CPT/CPG/CPDT/CPDG Pilot Controlled Check Valves for sale - buy cheap Yuken CPT/CPG/CPDT/CPDG ... CPT-10-E-04-50, CPDT-10-E-04-50
Yuken CPDG-10-20-60 CPDG-06-E-20-50 CPDG-03-50-50
Yuken CPT/CPG/CPDT/CPDG Pilot Controlled Check Valves on sale, Short lead time, Best price!!! CPDG-03-04-50, 3.3KG
CPDG-10-E-50-50 Pilot Controlled Check Valves
... valve to allow free flow direction. CPDG-10-E-50-50 Pilot Controlled Check Valves. Yuken CPT/CPG/CPDT/CPDG Pilot Controlled Check Valves Model List:
Yuken CPDG-10-20-60 CPDG-06-E-20-50 CPDG-03-50-50
Yuken CPT/CPG/CPDT/CPDG Pilot Controlled Check Valves on sale, Short lead time, Best price!!! CPDG-03-04
Yuken CPDT-10-E-50-50 Pilot Controlled Check Valves Video