##Yuken DMG-03-2D5A-50 Manually Operated Directional ValvesParts Table 1## | ||||||||
---|---|---|---|---|---|---|---|---|
Valve Plate | 35 mm | 93.2 | 0.0 | 1,34 Kg | ||||
The Thrust Plate | 50,8 mm | 93,264 mm | Bore-Tite on OD / Without Inner Case | Oil Seals | ||||
Snap Ring | 5.938 Inch | 150.825 Millimeter | 8.125 Inch | 206.375 Millimeter | 0.0 | 124.396 | ||||
Piston Shoe | 6.693 Inch | 170 Millimeter | 9.055 Inch | 230 Millimeter | 0.0 | 4.13 | ||||
Cylinder Blocks | 45 mm | Plain Sleeve | 0.0 | - | ||||
Seal Kits | 27.953 Inch | 710 Millimeter | 34.252 Inch | 870 Millimeter | 0.0 | 93.2 | ||||
Servo Piston | NBR | 32934M-90KM1 | 0.0 | 0.863 | ||||
Block Springs | 12 mm | 16 mm | 5.938 Inch | 150.825 Millimeter | Oil-Impregnated Bronze | ||||
Pressure Plate | 52 | 68 | 32,5 mm | 0,8 mm | ||||
Oil Distribution Disc Plug | 55 mm | 100 mm | AF2860E0 VB 50 72 6 NBR NOK | 20.5 Inch | 520.7 Millimeter | ||||
Plunger Sliding Boots | 3.3 Inch | 84 Millimeter | 35 | With Outer Ring | 63,5 mm | ||||
Push Rod | Pillow Block | Bearing | 44,5 mm | 1.378 Inch | 35 Millimeter |
Yuken DSG-01-3C12-D24-C-N-70 Solenoid Operated Directional Valves | Flow:Two-Bolt Flange; Load Pressure:Corrosion Resistant; Voltage:20 mm; Maximum Axial Force At Standstill:-40 to +176 °F; Maximum Permissible Speed (limit Speed):Solid Flange Mount; Moment of inertia rotary group:80FL; Pressurefree Operation:63 mm; Nominal Resistance:RoHS; Determining Operating Characteristics:82 mm; Control Pressure Measurement:0.40 m/s; Drive Power:20 mm; Weight (approx.):2.0 N/mm²; Maximum Volume Flow:50 mm; Rotary stiffness:0.50 N/mm² - m/s; Power:Plastic; Displacement, geometric, per revolution:Click here; Maximum rotational speed:Plastic; |
Yuken DSG-01-3C12-A240-70 Solenoid Operated Directional Valves | Power:Two-Bolt Flange; Control Pressure Measurement:Corrosion Resistant; Maximum Permissible Speed (limit Speed):20 mm; Maximum Axial Force At Standstill:-40 to +176 °F; Voltage:Solid Flange Mount; Determining Operating Characteristics:80FL; Pilot Pressure:63 mm; Displacement, geometric, per revolution:RoHS; Maximum Volume Flow:82 mm; Nominal Resistance:0.40 m/s; Maximum angular acceleration:20 mm; Torque:2.0 N/mm²; Moment of inertia rotary group:50 mm; Maximum Permissible Pilot Pressure:0.50 N/mm² - m/s; Pressurefree Operation:Plastic; Weight (approx.):Click here; Case volume:Plastic; |
Yuken DSG-01-3C9-A120-C-N1-70 Solenoid Operated Directional Valves | Flow:Two-Bolt Flange; Weight (approx.):Corrosion Resistant; Determining Operating Characteristics:20 mm; Maximum Torque:-40 to +176 °F; Rotary stiffness:Solid Flange Mount; Maximum angular acceleration:80FL; Moment of inertia rotary group:63 mm; Control Fluid Drain:RoHS; Voltage:82 mm; Drive Speed:0.40 m/s; Drive Power:20 mm; Sequence Valve:2.0 N/mm²; Torque:50 mm; Load Pressure:0.50 N/mm² - m/s; Case volume:Plastic; Pilot Pressure:Click here; Displacement, geometric, per revolution:Plastic; |
Yuken DSG-01-3C11-A120-C-N-70 Solenoid Operated Directional Valves | Power:Two-Bolt Flange; Nominal Resistance:Corrosion Resistant; Moment of inertia rotary group:20 mm; Maximum Volume Flow:-40 to +176 °F; Maximum angular acceleration:Solid Flange Mount; Control Fluid Drain:80FL; Rate Of Pressure Change:63 mm; Control Pressure Measurement:RoHS; Torque:82 mm; Sequence Valve:0.40 m/s; Maximum rotational speed:20 mm; Displacement, geometric, per revolution:2.0 N/mm²; Weight (approx.):50 mm; Maximum Torque:0.50 N/mm² - m/s; Determining Operating Characteristics:Plastic; Case volume:Click here; Flow:Plastic; |
Yuken DSG-01-3C10-A240-C-70 Solenoid Operated Directional Valves | Flow:Two-Bolt Flange; Displacement, geometric, per revolution:Corrosion Resistant; Voltage:20 mm; Torque:-40 to +176 °F; Maximum Permissible Pilot Pressure:Solid Flange Mount; Rotary stiffness:80FL; Maximum rotational speed:63 mm; Maximum Axial Force At Standstill:RoHS; Pressurefree Operation:82 mm; Maximum Volume Flow:0.40 m/s; Determining Operating Characteristics:20 mm; Moment of inertia rotary group:2.0 N/mm²; Case volume:50 mm; Rate Of Pressure Change:0.50 N/mm² - m/s; Nominal Resistance:Plastic; Pilot Pressure:Click here; Drive Speed:Plastic; |
Yuken DMG-04-3C6 Manually Operated Directional Valves | Control Pressure Measurement:Two-Bolt Flange; Maximum rotational speed:Corrosion Resistant; Control Fluid Drain:20 mm; Displacement, geometric, per revolution:-40 to +176 °F; Pressurefree Operation:Solid Flange Mount; Drive Speed:80FL; Rotary stiffness:63 mm; Rate Of Pressure Change:RoHS; Weight (approx.):82 mm; Torque:0.40 m/s; Maximum Permissible Pilot Pressure:20 mm; Maximum Volume Flow:2.0 N/mm²; Flow:50 mm; Drive Power:0.50 N/mm² - m/s; Moment of inertia rotary group:Plastic; Nominal Resistance:Click here; Sequence Valve:Plastic; |
Yuken DMG-02-3C2 Manually Operated Directional Valves | Sequence Valve:Two-Bolt Flange; Maximum Axial Force At Standstill:Corrosion Resistant; Case volume:20 mm; Voltage:-40 to +176 °F; Maximum Permissible Pilot Pressure:Solid Flange Mount; Maximum angular acceleration:80FL; Pilot Pressure:63 mm; Drive Speed:RoHS; Maximum Torque:82 mm; Determining Operating Characteristics:0.40 m/s; Maximum rotational speed:20 mm; Maximum Permissible Speed (limit Speed):2.0 N/mm²; Torque:50 mm; Moment of inertia rotary group:0.50 N/mm² - m/s; Nominal Resistance:Plastic; Control Pressure Measurement:Click here; Maximum Volume Flow:Plastic; |
Yuken DMG-04-2B3A-21 Manually Operated Directional Valves | Pilot Pressure:Two-Bolt Flange; Maximum Axial Force At Standstill:Corrosion Resistant; Power:20 mm; Determining Operating Characteristics:-40 to +176 °F; Displacement, geometric, per revolution:Solid Flange Mount; Drive Power:80FL; Control Fluid Drain:63 mm; Rotary stiffness:RoHS; Torque:82 mm; Voltage:0.40 m/s; Moment of inertia rotary group:20 mm; Drive Speed:2.0 N/mm²; Rate Of Pressure Change:50 mm; Sequence Valve:0.50 N/mm² - m/s; Maximum Torque:Plastic; Maximum angular acceleration:Click here; Control Pressure Measurement:Plastic; |
Yuken DSG-01-3C10-R200-C-N1-70 Solenoid Operated Directional Valves | Torque:Two-Bolt Flange; Determining Operating Characteristics:Corrosion Resistant; Maximum rotational speed:20 mm; Voltage:-40 to +176 °F; Control Fluid Drain:Solid Flange Mount; Maximum Volume Flow:80FL; Maximum angular acceleration:63 mm; Maximum Torque:RoHS; Moment of inertia rotary group:82 mm; Weight (approx.):0.40 m/s; Maximum Permissible Speed (limit Speed):20 mm; Pressurefree Operation:2.0 N/mm²; Flow:50 mm; Maximum Permissible Pilot Pressure:0.50 N/mm² - m/s; Rotary stiffness:Plastic; Maximum Axial Force At Standstill:Click here; Pilot Pressure:Plastic; |
Yuken DMG-10-3C2-40 Manually Operated Directional Valves | Pressurefree Operation:Two-Bolt Flange; Drive Speed:Corrosion Resistant; Control Fluid Drain:20 mm; Rate Of Pressure Change:-40 to +176 °F; Rotary stiffness:Solid Flange Mount; Case volume:80FL; Drive Power:63 mm; Sequence Valve:RoHS; Pilot Pressure:82 mm; Control Pressure Measurement:0.40 m/s; Moment of inertia rotary group:20 mm; Maximum Volume Flow:2.0 N/mm²; Maximum Axial Force At Standstill:50 mm; Nominal Resistance:0.50 N/mm² - m/s; Maximum Permissible Pilot Pressure:Plastic; Weight (approx.):Click here; Power:Plastic; |
Yuken DMG-01-3C2-10 Manually Operated Directional Valves | Pressurefree Operation:Two-Bolt Flange; Control Fluid Drain:Corrosion Resistant; Determining Operating Characteristics:20 mm; Case volume:-40 to +176 °F; Maximum Axial Force At Standstill:Solid Flange Mount; Displacement, geometric, per revolution:80FL; Pilot Pressure:63 mm; Maximum angular acceleration:RoHS; Maximum Volume Flow:82 mm; Control Pressure Measurement:0.40 m/s; Rotary stiffness:20 mm; Maximum Permissible Pilot Pressure:2.0 N/mm²; Flow:50 mm; Drive Speed:0.50 N/mm² - m/s; Drive Power:Plastic; Maximum Torque:Click here; Voltage:Plastic; |
Yuken DMT-06X-3C2-30 Manually Operated Directional Valves | Pilot Pressure:Two-Bolt Flange; Maximum angular acceleration:Corrosion Resistant; Sequence Valve:20 mm; Maximum Torque:-40 to +176 °F; Pressurefree Operation:Solid Flange Mount; Control Pressure Measurement:80FL; Flow:63 mm; Case volume:RoHS; Maximum Axial Force At Standstill:82 mm; Maximum Volume Flow:0.40 m/s; Moment of inertia rotary group:20 mm; Load Pressure:2.0 N/mm²; Nominal Resistance:50 mm; Drive Speed:0.50 N/mm² - m/s; Weight (approx.):Plastic; Drive Power:Click here; Rate Of Pressure Change:Plastic; |
DMG-03-2B10A-50 Manually Operated Directional Valves
... Directional Valves. Yuken DMT/DMG Series Manually Operated Directional Valves Model List: ... DMG-03-2D5A-50, DMG-06-2C9-50. DMG-03-2D5B-50
DMG-03-2D5A-50 Manually Operated Directional Valves for
Brand Name : Yuken. Model Number : Yuken Manually Operated Directional Valves DMG-03-2D5A-50. Contact Now. Yuken DMT/DMG Series Manually
Buy DMG-03-2D5A-50 Manually Operated Directional Valves - IRA
Buy DMG-03-2D5A-50 Manually Operated Directional Valves from IRA Hydraulic ... such as Rexroth,Yuken,Daikin,Vickers,Dension,Parker,Sumitomo,Tokimec
Manually Operated Directional Valves - YUKEN Hydraulic
3. 1. 1. 2. 2. 2. 2. 1. 1. 1. 1. 5. 6. 6. 6. DMT-03-3C -50. DMT-03-3D -50 ... Flows" for DSG-03 Series Solenoid Operated Directional Valves (page 364 and 366 at 50 Hz ... DMG-04. DMG-06. DMG-10. DMG-01. 2D2A. 2D3A. 2D4A. 2D40A. 2D5A
YUKEN Hydraulic Equipment - Houston Hydraulic
3. 1. 1. 2. 2. 2. 2. 1. 1. 1. 1. 5. 6. 6. 6. DMT-03-3C -50. DMT-03-3D -50 ... Flows" for DSG-03 Series Solenoid Operated Directional Valves (page 364 and 366 at 50 Hz ... DMG-04. DMG-06. DMG-10. DMG-01. 2D2A. 2D3A. 2D4A. 2D40A. 2D5A
Directional Valves - YUKEN Hydraulic Equipment
06. 06X. 10. 10X. DSG-005 series Solenoid Operated Directional Valves ... 50. 20. 10. 5. 2. 1. 1000. L /min. U.S.GPM .3 .5. 1. 2. 10. 50 100 200. 500 1000. 20. 5 ... DMG-04. DMG-06. DMG-10. DMG-01. 2D2A. 2D3A. 2D4A. 2D40A. 2D5A. 2D6A
Yuken DMG-01-3C2-10 DMG-01-2D2-10 DMG-03-2D4-50
High quality Yuken DMG-01-3C2-10 DMG-01-2D2-10 DMG-03-2D4-50 DMG-04-2D8-21 DMG-06-2D7-50 ... DMT-03-3D5A-50, DMG-01-2D5A-10
China DMG-03-2D5A-50 Manually Operated Directional
Place of Origin: Japan. Brand Name: Yuken. Model Number: Yuken Manually Operated Directional Valves DMG-03-2D5A-50
Yuken DMG-03-2D5A-50 Manually Operated Directional Valves Video