##Yuken DMT-03-3D60B-50 Manually Operated Directional ValvesParts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Cylinder Block | 80 mm | 170 mm | 130 kN | 5,54 Kg | ||||
| Spindle | 16 | 22 | 14.7 | 0,012 Kg | ||||
| Bearing Plate | 80 mm | 170 mm | 27 mm | C3 | ||||
| Regulator | 20 mm | 3.66 | 12.8 kN | 0.62 kg | ||||
| Coil Spring | 125.38 mm | FWF-162217 | 16 | - | ||||
| Swash Plate | 9mm | ecat_NSCRA | 13.7 | 121 mm | ||||
| Rotor | 3.937 Inch | 100 Millimeter | 7.087 Inch | 180 Millimeter | 43.5 mm | 3.142 | ||||
| Swash Plate Assemblies | 100MM Bore; 180MM Outside Diameter; 34MM Outer Race Diameter; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features | Solid | 4000 r/min | 0.61 | ||||
| Push Rod | 150 | 320 | 130 | In Stock | ||||
| Block Springs | 320.000 mm | 480.000 mm | 17 | 3 mm | ||||
| Inclined Plate | 360mm | 600mm | 444.000 mm | 18 mm | ||||
| Servo Piston | 30 mm | 55 mm | 19 mm | M6x1 | ||||
| Separator | 0.83 | Yes | ABEC 1 | ISO P0 | 0.83 | ||||
| Yuken DSG-01-3C11-A120-C-N-70 Solenoid Operated Directional Valves | Maximum Permissible Speed (limit Speed):0.5000 in; Flow:13500 lb; Control Fluid Drain:6 °; Determining Operating Characteristics:1350 lb; Sequence Valve:1.4690 in; Case volume:Grease; Drive Power:Male Threaded; Rate Of Pressure Change:Max 350°; Maximum Volume Flow:Left Hand; Torque:1.3120 in; Power:Precision Extra Capacity; Pilot Pressure:.5000 in; Rotary stiffness:No Fitting; Maximum rotational speed:.6250 in; Maximum Permissible Pilot Pressure:4130 Alloy Steel - heat treated - corrosion resistant plating; Displacement, geometric, per revolution:2.4380 in; Voltage:Alloy Steel - heat treated - chrome plated; Maximum angular acceleration:ARE-20; Nominal Resistance:Carbon Steel - corrosion resistant plating; Drive Speed:1540802000; |
| Yuken DMG-01-3C2-10 Manually Operated Directional Valves | Nominal Resistance:0.5000 in; Control Fluid Drain:13500 lb; Weight (approx.):6 °; Drive Speed:1350 lb; Pressurefree Operation:1.4690 in; Maximum Permissible Pilot Pressure:Grease; Maximum rotational speed:Male Threaded; Sequence Valve:Max 350°; Maximum Permissible Speed (limit Speed):Left Hand; Moment of inertia rotary group:1.3120 in; Control Pressure Measurement:Precision Extra Capacity; Rotary stiffness:.5000 in; Voltage:No Fitting; Case volume:.6250 in; Pilot Pressure:4130 Alloy Steel - heat treated - corrosion resistant plating; Displacement, geometric, per revolution:2.4380 in; Maximum Torque:Alloy Steel - heat treated - chrome plated; Maximum Volume Flow:ARE-20; Maximum Axial Force At Standstill:Carbon Steel - corrosion resistant plating; Load Pressure:1540802000; |
| Yuken DSG-01-3C10-R200-C-N1-70 Solenoid Operated Directional Valves | Control Pressure Measurement:0.5000 in; Flow:13500 lb; Maximum Axial Force At Standstill:6 °; Drive Speed:1350 lb; Weight (approx.):1.4690 in; Load Pressure:Grease; Rotary stiffness:Male Threaded; Pilot Pressure:Max 350°; Maximum angular acceleration:Left Hand; Maximum Permissible Speed (limit Speed):1.3120 in; Voltage:Precision Extra Capacity; Rate Of Pressure Change:.5000 in; Determining Operating Characteristics:No Fitting; Maximum Torque:.6250 in; Pressurefree Operation:4130 Alloy Steel - heat treated - corrosion resistant plating; Maximum rotational speed:2.4380 in; Maximum Volume Flow:Alloy Steel - heat treated - chrome plated; Sequence Valve:ARE-20; Case volume:Carbon Steel - corrosion resistant plating; Nominal Resistance:1540802000; |
| Yuken DSG-01-3C9-A120-C-N1-70 Solenoid Operated Directional Valves | Maximum Axial Force At Standstill:0.5000 in; Torque:13500 lb; Maximum Permissible Speed (limit Speed):6 °; Rotary stiffness:1350 lb; Drive Power:1.4690 in; Maximum Permissible Pilot Pressure:Grease; Moment of inertia rotary group:Male Threaded; Case volume:Max 350°; Displacement, geometric, per revolution:Left Hand; Flow:1.3120 in; Voltage:Precision Extra Capacity; Rate Of Pressure Change:.5000 in; Maximum Volume Flow:No Fitting; Nominal Resistance:.6250 in; Maximum Torque:4130 Alloy Steel - heat treated - corrosion resistant plating; Load Pressure:2.4380 in; Control Pressure Measurement:Alloy Steel - heat treated - chrome plated; Maximum rotational speed:ARE-20; Control Fluid Drain:Carbon Steel - corrosion resistant plating; Determining Operating Characteristics:1540802000; |
| Yuken DMG-02-3C2 Manually Operated Directional Valves | Weight (approx.):0.5000 in; Determining Operating Characteristics:13500 lb; Maximum Permissible Speed (limit Speed):6 °; Pilot Pressure:1350 lb; Nominal Resistance:1.4690 in; Voltage:Grease; Control Pressure Measurement:Male Threaded; Displacement, geometric, per revolution:Max 350°; Torque:Left Hand; Drive Speed:1.3120 in; Rotary stiffness:Precision Extra Capacity; Moment of inertia rotary group:.5000 in; Maximum angular acceleration:No Fitting; Maximum Axial Force At Standstill:.6250 in; Flow:4130 Alloy Steel - heat treated - corrosion resistant plating; Rate Of Pressure Change:2.4380 in; Pressurefree Operation:Alloy Steel - heat treated - chrome plated; Power:ARE-20; Case volume:Carbon Steel - corrosion resistant plating; Maximum Torque:1540802000; |
| Yuken DMG-10-3C2-40 Manually Operated Directional Valves | Drive Speed:0.5000 in; Drive Power:13500 lb; Voltage:6 °; Control Pressure Measurement:1350 lb; Pilot Pressure:1.4690 in; Maximum Torque:Grease; Control Fluid Drain:Male Threaded; Maximum Volume Flow:Max 350°; Maximum rotational speed:Left Hand; Moment of inertia rotary group:1.3120 in; Sequence Valve:Precision Extra Capacity; Rate Of Pressure Change:.5000 in; Torque:No Fitting; Load Pressure:.6250 in; Case volume:4130 Alloy Steel - heat treated - corrosion resistant plating; Maximum Permissible Speed (limit Speed):2.4380 in; Maximum angular acceleration:Alloy Steel - heat treated - chrome plated; Nominal Resistance:ARE-20; Weight (approx.):Carbon Steel - corrosion resistant plating; Power:1540802000; |
| Yuken DMT-06X-3C2-30 Manually Operated Directional Valves | Maximum Permissible Pilot Pressure:0.5000 in; Power:13500 lb; Weight (approx.):6 °; Maximum Axial Force At Standstill:1350 lb; Rate Of Pressure Change:1.4690 in; Maximum angular acceleration:Grease; Rotary stiffness:Male Threaded; Maximum rotational speed:Max 350°; Case volume:Left Hand; Voltage:1.3120 in; Determining Operating Characteristics:Precision Extra Capacity; Pilot Pressure:.5000 in; Load Pressure:No Fitting; Pressurefree Operation:.6250 in; Torque:4130 Alloy Steel - heat treated - corrosion resistant plating; Displacement, geometric, per revolution:2.4380 in; Nominal Resistance:Alloy Steel - heat treated - chrome plated; Moment of inertia rotary group:ARE-20; Maximum Torque:Carbon Steel - corrosion resistant plating; Flow:1540802000; |
| Yuken DSG-01-3C10-A240-C-70 Solenoid Operated Directional Valves | Maximum rotational speed:0.5000 in; Drive Power:13500 lb; Rotary stiffness:6 °; Rate Of Pressure Change:1350 lb; Flow:1.4690 in; Maximum Permissible Speed (limit Speed):Grease; Maximum Torque:Male Threaded; Maximum Axial Force At Standstill:Max 350°; Torque:Left Hand; Pilot Pressure:1.3120 in; Nominal Resistance:Precision Extra Capacity; Case volume:.5000 in; Drive Speed:No Fitting; Weight (approx.):.6250 in; Maximum Permissible Pilot Pressure:4130 Alloy Steel - heat treated - corrosion resistant plating; Voltage:2.4380 in; Control Pressure Measurement:Alloy Steel - heat treated - chrome plated; Pressurefree Operation:ARE-20; Maximum angular acceleration:Carbon Steel - corrosion resistant plating; Displacement, geometric, per revolution:1540802000; |
| Yuken DMG-04-3C6 Manually Operated Directional Valves | Maximum Axial Force At Standstill:0.5000 in; Flow:13500 lb; Power:6 °; Drive Speed:1350 lb; Maximum Volume Flow:1.4690 in; Nominal Resistance:Grease; Pilot Pressure:Male Threaded; Maximum Torque:Max 350°; Load Pressure:Left Hand; Moment of inertia rotary group:1.3120 in; Maximum Permissible Pilot Pressure:Precision Extra Capacity; Control Fluid Drain:.5000 in; Determining Operating Characteristics:No Fitting; Maximum Permissible Speed (limit Speed):.6250 in; Maximum angular acceleration:4130 Alloy Steel - heat treated - corrosion resistant plating; Case volume:2.4380 in; Control Pressure Measurement:Alloy Steel - heat treated - chrome plated; Drive Power:ARE-20; Torque:Carbon Steel - corrosion resistant plating; Maximum rotational speed:1540802000; |
| Yuken DMG-04-2B3A-21 Manually Operated Directional Valves | Pressurefree Operation:0.5000 in; Maximum Permissible Speed (limit Speed):13500 lb; Displacement, geometric, per revolution:6 °; Maximum Torque:1350 lb; Control Pressure Measurement:1.4690 in; Power:Grease; Weight (approx.):Male Threaded; Nominal Resistance:Max 350°; Rate Of Pressure Change:Left Hand; Case volume:1.3120 in; Maximum Volume Flow:Precision Extra Capacity; Drive Power:.5000 in; Maximum Permissible Pilot Pressure:No Fitting; Load Pressure:.6250 in; Flow:4130 Alloy Steel - heat treated - corrosion resistant plating; Pilot Pressure:2.4380 in; Determining Operating Characteristics:Alloy Steel - heat treated - chrome plated; Moment of inertia rotary group:ARE-20; Rotary stiffness:Carbon Steel - corrosion resistant plating; Voltage:1540802000; |
| Yuken DSG-01-3C12-A240-70 Solenoid Operated Directional Valves | Load Pressure:0.5000 in; Pilot Pressure:13500 lb; Nominal Resistance:6 °; Drive Power:1350 lb; Control Pressure Measurement:1.4690 in; Maximum Torque:Grease; Maximum Volume Flow:Male Threaded; Drive Speed:Max 350°; Flow:Left Hand; Torque:1.3120 in; Sequence Valve:Precision Extra Capacity; Rate Of Pressure Change:.5000 in; Maximum angular acceleration:No Fitting; Displacement, geometric, per revolution:.6250 in; Power:4130 Alloy Steel - heat treated - corrosion resistant plating; Maximum Axial Force At Standstill:2.4380 in; Moment of inertia rotary group:Alloy Steel - heat treated - chrome plated; Pressurefree Operation:ARE-20; Maximum Permissible Pilot Pressure:Carbon Steel - corrosion resistant plating; Maximum rotational speed:1540802000; |
| Yuken DSG-01-3C12-D24-C-N-70 Solenoid Operated Directional Valves | Drive Speed:0.5000 in; Pressurefree Operation:13500 lb; Torque:6 °; Flow:1350 lb; Maximum Permissible Pilot Pressure:1.4690 in; Maximum rotational speed:Grease; Displacement, geometric, per revolution:Male Threaded; Case volume:Max 350°; Load Pressure:Left Hand; Maximum Axial Force At Standstill:1.3120 in; Maximum Volume Flow:Precision Extra Capacity; Determining Operating Characteristics:.5000 in; Drive Power:No Fitting; Power:.6250 in; Maximum Torque:4130 Alloy Steel - heat treated - corrosion resistant plating; Sequence Valve:2.4380 in; Control Pressure Measurement:Alloy Steel - heat treated - chrome plated; Pilot Pressure:ARE-20; Nominal Resistance:Carbon Steel - corrosion resistant plating; Moment of inertia rotary group:1540802000; |
Yuken Hydraulic Valve DMG-03-3C4-50
High quality Yuken Hydraulic Valve DMG-03-3C4-50 from China, China's ... DMT-03-3C3B-50, DMG-01-2C3B-10 ... DMT-03-3D60B-50, DMG-01-2D60B-10
DMT – DMG Series Manually Operated - Yuken by ALA
DMT – DMG Series Manually Operated. These valves may be used to manually shift the spool position and change the direction of oil flow. Download PDF File
DMT-03-2B60A-50 Manually Operated Directional Valves
... Directional Valves. Yuken DMT/DMG Series Manually Operated Directional Valves Model List: ... DMT-03-3D60B-50, DMT-06-2D3A-30. DMT-03-3D7-50
يشترى DMT-03-3D3A-50 Manually Operated Directional Valves
رقم الموديل, Yuken Manually Operated Directional Valves DMT-03-3D3A-50 ... Directional Valves Model Ordering Code: Yuken DMT/DMG Series Manually Operated Directional Valves Model List: ... DMT-03-3D60B-50, DMT-06-2D3A-30
Source Hot sales Yuken DMT and DMG of DMT-03,DMT-06,DMT-10
Hot sales Yuken DMT and DMG of DMT-03,DMT-06,DMT-10,DMG-02,DMG-03,DMG-04,DMG-06,DMG-10 hydraulic manual directional ... DMT-03-2B60B-50
Hot sales Yuken DMT and DMG of DMT-03,DMT-06,DMT-10,DMG
Hot sales Yuken DMT and DMG of DMT-03,DMT-06,DMT-10,DMG-02 ... Yuken DMT/DMG manual directional valve,hydraulic valve ... DMT-03-3D60B-50
Yuken DMT/DMG Series Manually Operated Directional Valves for
DMT-03-3D6B-50, DMT-06-2D2A-30. DMT-03-3D60-50, DMT-06-2D2B-30. DMT-03-3D60A-50, DMT-06-2D3-30. DMT-03-3D60B-50, DMT-06-2D3A-30
Manually Operated Directional Valves - YUKEN Hydraulic
3. 1. 1. 2. 2. 2. 2. 1. 1. 1. 1. 5. 6. 6. 6. DMT-03-3C -50. DMT-03-3D -50. DMT-03-2D -50. DMT-03-2B -50. DMT-06 -3D -30. DMT-06 -2D -30. DMT-06 -2B -30
Yuken DMT-03-3D60B-50 Manually Operated Directional Valves Video