##Yuken S-BSG-03-2B3B-A100-R-52 Solenoid Controlled Relief ValvesParts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Press Pin | 0,44 Kg | 12 mm | N/A | 0.0 | ||||
| Gear Pump | 1,5 Kg | 3,175 mm | N/A | 0.0 | ||||
| Rotor | 17.252 | 3.5 Inch | 88.9 Millimeter | N/A | 0.0 | ||||
| Block Cylinder | 9.988 | 2.756 Inch | 70 Millimeter | N/A | 0.0 | ||||
| Ball Guide | 1.407 | -40 to 250 ºF | N/A | 0.0 | ||||
| Regulator | 2.343 | 1.188 Inch | 30.175 Millimeter | N/A | 0.0 | ||||
| Plunger Sliding Boots | 0.028 | Double Lip Viton | N/A | 0.0 | ||||
| Guide Ball | 2.813 | 125 mm | N/A | 0.0 | ||||
| Valve Plates | 46.0 lb | 31171504 | Mounted Bearing | 0.236 in | ||||
| Housings Casings | Double Row | Single Nut | Non-expansion | Three Lip Urethane Seal | Steel Cage | 400 mm | 0.24 in | 12 mm | ||||
| Cylinder Blocks | 5/8 Inch | 0.0020 | R2ZZA | Take Up | ||||
| Cylinder | Set Screw | Imperial | 1/2 Inch | 125 mm | ||||
| Yuken DSG-01-3C11-A120-C-N-70 Solenoid Operated Directional Valves | Drive Speed:NJ2222-E-TVP3+HJ2222-E; Power:110x200x53; Maximum Axial Force At Standstill:110; Load Pressure:200; Case volume:53; Maximum Permissible Pilot Pressure:110 mm; Determining Operating Characteristics:132,5 mm; Control Pressure Measurement:200 mm; Maximum rotational speed:53 mm; Displacement, geometric, per revolution:53 mm; Pressurefree Operation:141,6 mm; Control Fluid Drain:2,1 mm; Sequence Valve:2,1 mm; Maximum angular acceleration:2,1 mm; Pilot Pressure:2,1 mm; Rate Of Pressure Change:11 mm; Weight (approx.):19,5 mm; Rotary stiffness:174,6 mm; Voltage:4 mm; Torque:7,35 Kg; Maximum Torque:429 kN; Nominal Resistance:520 kN; |
| Yuken DSG-01-3C12-D24-C-N-70 Solenoid Operated Directional Valves | Maximum Volume Flow:NJ2222-E-TVP3+HJ2222-E; Flow:110x200x53; Power:110; Determining Operating Characteristics:200; Maximum rotational speed:53; Voltage:110 mm; Rate Of Pressure Change:132,5 mm; Drive Power:200 mm; Maximum Torque:53 mm; Load Pressure:53 mm; Sequence Valve:141,6 mm; Maximum angular acceleration:2,1 mm; Displacement, geometric, per revolution:2,1 mm; Maximum Permissible Speed (limit Speed):2,1 mm; Pilot Pressure:2,1 mm; Torque:11 mm; Maximum Axial Force At Standstill:19,5 mm; Control Fluid Drain:174,6 mm; Maximum Permissible Pilot Pressure:4 mm; Case volume:7,35 Kg; Pressurefree Operation:429 kN; Weight (approx.):520 kN; |
| Yuken DMG-04-3C6 Manually Operated Directional Valves | Flow:NJ2222-E-TVP3+HJ2222-E; Maximum rotational speed:110x200x53; Pressurefree Operation:110; Maximum angular acceleration:200; Maximum Permissible Speed (limit Speed):53; Rotary stiffness:110 mm; Load Pressure:132,5 mm; Power:200 mm; Torque:53 mm; Maximum Axial Force At Standstill:53 mm; Weight (approx.):141,6 mm; Control Pressure Measurement:2,1 mm; Drive Power:2,1 mm; Determining Operating Characteristics:2,1 mm; Sequence Valve:2,1 mm; Nominal Resistance:11 mm; Case volume:19,5 mm; Displacement, geometric, per revolution:174,6 mm; Drive Speed:4 mm; Rate Of Pressure Change:7,35 Kg; Pilot Pressure:429 kN; Moment of inertia rotary group:520 kN; |
| Yuken DSG-01-3C10-A240-C-70 Solenoid Operated Directional Valves | Control Pressure Measurement:NJ2222-E-TVP3+HJ2222-E; Maximum Permissible Speed (limit Speed):110x200x53; Nominal Resistance:110; Maximum rotational speed:200; Pressurefree Operation:53; Maximum Axial Force At Standstill:110 mm; Moment of inertia rotary group:132,5 mm; Weight (approx.):200 mm; Voltage:53 mm; Maximum angular acceleration:53 mm; Displacement, geometric, per revolution:141,6 mm; Sequence Valve:2,1 mm; Maximum Volume Flow:2,1 mm; Drive Power:2,1 mm; Pilot Pressure:2,1 mm; Rotary stiffness:11 mm; Rate Of Pressure Change:19,5 mm; Power:174,6 mm; Maximum Permissible Pilot Pressure:4 mm; Maximum Torque:7,35 Kg; Determining Operating Characteristics:429 kN; Control Fluid Drain:520 kN; |
| Yuken DMG-01-3C2-10 Manually Operated Directional Valves | Maximum Torque:NJ2222-E-TVP3+HJ2222-E; Maximum Permissible Speed (limit Speed):110x200x53; Voltage:110; Pilot Pressure:200; Case volume:53; Displacement, geometric, per revolution:110 mm; Control Fluid Drain:132,5 mm; Rotary stiffness:200 mm; Drive Power:53 mm; Torque:53 mm; Nominal Resistance:141,6 mm; Maximum Axial Force At Standstill:2,1 mm; Maximum angular acceleration:2,1 mm; Moment of inertia rotary group:2,1 mm; Determining Operating Characteristics:2,1 mm; Sequence Valve:11 mm; Flow:19,5 mm; Drive Speed:174,6 mm; Pressurefree Operation:4 mm; Rate Of Pressure Change:7,35 Kg; Load Pressure:429 kN; Maximum rotational speed:520 kN; |
| Yuken DMG-02-3C2 Manually Operated Directional Valves | Weight (approx.):NJ2222-E-TVP3+HJ2222-E; Torque:110x200x53; Sequence Valve:110; Maximum angular acceleration:200; Load Pressure:53; Control Fluid Drain:110 mm; Nominal Resistance:132,5 mm; Maximum Torque:200 mm; Rotary stiffness:53 mm; Case volume:53 mm; Maximum rotational speed:141,6 mm; Determining Operating Characteristics:2,1 mm; Pilot Pressure:2,1 mm; Maximum Permissible Speed (limit Speed):2,1 mm; Maximum Axial Force At Standstill:2,1 mm; Moment of inertia rotary group:11 mm; Drive Speed:19,5 mm; Flow:174,6 mm; Drive Power:4 mm; Maximum Volume Flow:7,35 Kg; Power:429 kN; Maximum Permissible Pilot Pressure:520 kN; |
| Yuken DSG-01-3C10-R200-C-N1-70 Solenoid Operated Directional Valves | Nominal Resistance:NJ2222-E-TVP3+HJ2222-E; Determining Operating Characteristics:110x200x53; Maximum Permissible Speed (limit Speed):110; Load Pressure:200; Maximum rotational speed:53; Moment of inertia rotary group:110 mm; Displacement, geometric, per revolution:132,5 mm; Control Fluid Drain:200 mm; Sequence Valve:53 mm; Voltage:53 mm; Rotary stiffness:141,6 mm; Maximum Volume Flow:2,1 mm; Maximum Permissible Pilot Pressure:2,1 mm; Maximum Axial Force At Standstill:2,1 mm; Control Pressure Measurement:2,1 mm; Power:11 mm; Maximum Torque:19,5 mm; Pressurefree Operation:174,6 mm; Weight (approx.):4 mm; Drive Power:7,35 Kg; Case volume:429 kN; Torque:520 kN; |
| Yuken DMG-04-2B3A-21 Manually Operated Directional Valves | Maximum Permissible Pilot Pressure:NJ2222-E-TVP3+HJ2222-E; Maximum Axial Force At Standstill:110x200x53; Maximum angular acceleration:110; Rate Of Pressure Change:200; Moment of inertia rotary group:53; Displacement, geometric, per revolution:110 mm; Pressurefree Operation:132,5 mm; Maximum Torque:200 mm; Drive Speed:53 mm; Rotary stiffness:53 mm; Maximum Permissible Speed (limit Speed):141,6 mm; Control Pressure Measurement:2,1 mm; Nominal Resistance:2,1 mm; Control Fluid Drain:2,1 mm; Flow:2,1 mm; Load Pressure:11 mm; Drive Power:19,5 mm; Sequence Valve:174,6 mm; Torque:4 mm; Determining Operating Characteristics:7,35 Kg; Maximum Volume Flow:429 kN; Pilot Pressure:520 kN; |
| Yuken DMG-10-3C2-40 Manually Operated Directional Valves | Control Pressure Measurement:NJ2222-E-TVP3+HJ2222-E; Rotary stiffness:110x200x53; Drive Power:110; Weight (approx.):200; Maximum Volume Flow:53; Maximum Axial Force At Standstill:110 mm; Determining Operating Characteristics:132,5 mm; Power:200 mm; Flow:53 mm; Maximum Torque:53 mm; Maximum Permissible Speed (limit Speed):141,6 mm; Maximum angular acceleration:2,1 mm; Moment of inertia rotary group:2,1 mm; Torque:2,1 mm; Maximum Permissible Pilot Pressure:2,1 mm; Load Pressure:11 mm; Pilot Pressure:19,5 mm; Voltage:174,6 mm; Pressurefree Operation:4 mm; Control Fluid Drain:7,35 Kg; Nominal Resistance:429 kN; Drive Speed:520 kN; |
| Yuken DMT-06X-3C2-30 Manually Operated Directional Valves | Power:NJ2222-E-TVP3+HJ2222-E; Case volume:110x200x53; Maximum rotational speed:110; Maximum Volume Flow:200; Sequence Valve:53; Maximum Permissible Speed (limit Speed):110 mm; Maximum angular acceleration:132,5 mm; Determining Operating Characteristics:200 mm; Weight (approx.):53 mm; Nominal Resistance:53 mm; Maximum Permissible Pilot Pressure:141,6 mm; Torque:2,1 mm; Control Fluid Drain:2,1 mm; Drive Power:2,1 mm; Maximum Torque:2,1 mm; Rotary stiffness:11 mm; Voltage:19,5 mm; Pressurefree Operation:174,6 mm; Moment of inertia rotary group:4 mm; Displacement, geometric, per revolution:7,35 Kg; Control Pressure Measurement:429 kN; Load Pressure:520 kN; |
| Yuken DSG-01-3C9-A120-C-N1-70 Solenoid Operated Directional Valves | Control Fluid Drain:NJ2222-E-TVP3+HJ2222-E; Drive Power:110x200x53; Pressurefree Operation:110; Control Pressure Measurement:200; Power:53; Voltage:110 mm; Maximum angular acceleration:132,5 mm; Maximum Permissible Speed (limit Speed):200 mm; Determining Operating Characteristics:53 mm; Maximum rotational speed:53 mm; Drive Speed:141,6 mm; Torque:2,1 mm; Maximum Torque:2,1 mm; Flow:2,1 mm; Displacement, geometric, per revolution:2,1 mm; Load Pressure:11 mm; Maximum Permissible Pilot Pressure:19,5 mm; Sequence Valve:174,6 mm; Rotary stiffness:4 mm; Maximum Volume Flow:7,35 Kg; Pilot Pressure:429 kN; Nominal Resistance:520 kN; |
| Yuken DSG-01-3C12-A240-70 Solenoid Operated Directional Valves | Control Pressure Measurement:NJ2222-E-TVP3+HJ2222-E; Sequence Valve:110x200x53; Pilot Pressure:110; Power:200; Maximum Volume Flow:53; Flow:110 mm; Pressurefree Operation:132,5 mm; Determining Operating Characteristics:200 mm; Rotary stiffness:53 mm; Control Fluid Drain:53 mm; Maximum Torque:141,6 mm; Voltage:2,1 mm; Nominal Resistance:2,1 mm; Torque:2,1 mm; Displacement, geometric, per revolution:2,1 mm; Moment of inertia rotary group:11 mm; Load Pressure:19,5 mm; Weight (approx.):174,6 mm; Maximum rotational speed:4 mm; Rate Of Pressure Change:7,35 Kg; Drive Power:429 kN; Drive Speed:520 kN; |
Yuken S-BSG Series Low Noise Type Solenoid Controlled
Quality Relief Valves manufacturers & exporter - buy Yuken S-BSG Series Low Noise Type ... S-BSG-03-2B3B-A100-R-52, S-BSG-03-V-3C2-A120-L-52
Yuken hydraulic pressure control valves - relief valves, pilot
Yuken S-BG series Low Noise Type Pilot Operated Relief Valves ... BST-06-2B3A-A100-48; BST-06-2B3A-A120-4890; BST-06-2B3B-A100-48; BST-06-2B3B-A100-4890 ... S-BSG-03-3C3-D24-L-52; S-BSG-03-V-2B3B-D24-N1-53 ... Reducing Relief Valve; RBG-03-R-1090 - Pressure Reducing & Relieving; RBG-06-10
Yuken S-BSG Series Low Noise Type Solenoid Controlled Relief
Yuken S-BSG Series Low Noise Type Solenoid Controlled Relief Valves. China Yuken S-BSG Series Low Noise ... S-BSG-03-2B3A-A100-R-52, S-BSG-03-V-2B2-A120-L-52 ... S-BSG-03-2B3B-A100-N-L-52, S-BSG-03-V-3C2-A120-R-52
Low Noise Type Solenoid Controlled Relief Valves - YUKEN
-03. Valve size. -V. High. Venting. Pres. Feature. -2B3A. Vent. Type. -A100 ... Models with vent restrictor are applicable only for the vent type 2B3A and 2B3B. ... (design 52) with respect to specifications, exterior shape and mounting dimensions. ... DC/R Solenoid. L j. Model. Numbers. S-BSG-03. S-BSG-06. S-BSG-10. 76
Solenoid Controlled Relief Valves - YUKEN Hydraulic
Piping between the two is eliminated as the solenoid valve is directly mounted on the ... -03. -V. -2B3A -A100. -N. -48. Specifications. Model Number Designation ... Models with vent restrictor are applicable only for the vent type 2B3A and 2B3B. ... N. American Design Std. Socket Head Cap Screw. BSG-03. BSG-06. BSG-10
Houston Hydraulic > Yuken > Valves > Pressure Control
Pilot Operated Relief Valves (Low Noise Type) - Yuken S-BG Series · Spec Sheet ... A-S-BSG-06-2B3B-D24-R-53. Low Noise ... A-S-BSG-10-2B3B-A100-53 ... S-BSG-03-2B3B-A240-N-52. Low Noise Sol Relief Valve. Size: 03. Max GPM: 26.4
Yuken S-BSG-03-2B3B-A240-N1-53 Low Noise Solenoid
Yuken S-BSG-03-2B3B-A240-N1-53 Low Noise Solenoid Controlled Relief ... S-BSG-03-2B3B-A100-R-52, 6.5KG ... S-BSG-03-V-2B3B-A100-N-R-52, 6.5KG
Yuken S-BSG-03-2B3B-A240-N1-53 Low Noise Solenoid
Quality Yuken S-BSG-03-2B3B-A240-N1-53 Low Noise Solenoid Controlled Relief Valve for sale - buy cheap Yuken ... S-BSG-03-2B3A-A100-R-52, 6.5KG
Yuken S-BSG-03-2B3B-A100-R-52 Solenoid Controlled Relief Valves Video