##Yuken BSG-10-2B3B-D48-N-47 Solenoid Controlled Relief ValvesParts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Seal Kit For Hyd Pump | 1750,000 mm | 1250,000 mm | with grooved raceway(s) | 390,000 mm | ||||
| Rod | 160 mm | 90 mm | 35 Degree | 4 Point | 52,4 | ||||
| Inclined Plate | 230 | 110 | 110 | Metric System | ||||
| Bushing Spring | 130 mm | 75 mm | 1,2 Kg | 25 mm | ||||
| Plunger Sliding Boots | 1.254 Inch | 31.852 Millimeter | 1.004 Inch | 25.502 Millimeter | - | Without Inner Case | ||||
| Valve Plates | 6 Inch | 152.4 Millimeter | 5 Inch | 127 Millimeter | 0.399 | 0.5 Inch | 12.7 Millimeter | ||||
| Drive Shaft | http://www.isostatic.com | 5" Bore; 6" Outside Diameter; 1/2" Width; Open; No Flush Ground; Ball Bearing; Single Row of Balls; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; C0-Medium; Brass Cage; 35 Degree | 4 | - | Angular Contact Ball Bearing (Single Row) | ||||
| The Thrust Plate | 934 N | With Outer Ring | - | Ball Bearing | ||||
| Swash Plate | 230 | 2.1654 in | 1.24 lbs | Double Lip with Spring | ||||
| Bearings | 76 mm | 0.87 | S0 | 0.0938 in | ||||
| Regulator | 390,000 | Flat | 2,82 mm | 9 Days | ||||
| Gear Pump | 190.0000 mm | 90.000 mm | C0-Medium | 43.00 mm | ||||
| Swing | ABEC 1 | ISO P0 | With Outer Ring | 0.19 lbs | 2.244 in | ||||
| Yuken DSG-01-3C12-A240-70 Solenoid Operated Directional Valves | Sequence Valve:0.6250 in; Power:1000 lb; Drive Power:1.3440 in; Maximum Permissible Speed (limit Speed):Grease; Torque:Female Threaded with Male Stud; Flow:Max 350°; Maximum rotational speed:5/8-18; Drive Speed:1.5000 in; Rate Of Pressure Change:Right Hand; Voltage:.5620 in; Nominal Resistance:Commercial; Determining Operating Characteristics:.7500 in; Maximum Torque:No Fitting; Maximum Axial Force At Standstill:2.5000 in; Maximum Volume Flow:Carbon Steel - corrosion resistant plating; Pilot Pressure:CFF; Rotary stiffness:Alloy Steel - heat treated - chrome plated; Maximum Permissible Pilot Pressure:1491008000; Control Pressure Measurement:10000 lb; |
| Yuken DSG-01-3C9-A120-C-N1-70 Solenoid Operated Directional Valves | Drive Power:0.6250 in; Rotary stiffness:1000 lb; Pilot Pressure:1.3440 in; Determining Operating Characteristics:Grease; Power:Female Threaded with Male Stud; Load Pressure:Max 350°; Case volume:5/8-18; Weight (approx.):1.5000 in; Pressurefree Operation:Right Hand; Torque:.5620 in; Voltage:Commercial; Maximum rotational speed:.7500 in; Maximum Axial Force At Standstill:No Fitting; Displacement, geometric, per revolution:2.5000 in; Moment of inertia rotary group:Carbon Steel - corrosion resistant plating; Control Pressure Measurement:CFF; Maximum Permissible Pilot Pressure:Alloy Steel - heat treated - chrome plated; Nominal Resistance:1491008000; Sequence Valve:10000 lb; |
| Yuken DSG-01-3C12-D24-C-N-70 Solenoid Operated Directional Valves | Flow:0.6250 in; Rotary stiffness:1000 lb; Maximum rotational speed:1.3440 in; Load Pressure:Grease; Sequence Valve:Female Threaded with Male Stud; Maximum Axial Force At Standstill:Max 350°; Maximum Torque:5/8-18; Pilot Pressure:1.5000 in; Torque:Right Hand; Drive Speed:.5620 in; Pressurefree Operation:Commercial; Rate Of Pressure Change:.7500 in; Nominal Resistance:No Fitting; Case volume:2.5000 in; Moment of inertia rotary group:Carbon Steel - corrosion resistant plating; Power:CFF; Maximum Volume Flow:Alloy Steel - heat treated - chrome plated; Maximum Permissible Pilot Pressure:1491008000; Control Pressure Measurement:10000 lb; |
| Yuken DMG-10-3C2-40 Manually Operated Directional Valves | Nominal Resistance:0.6250 in; Moment of inertia rotary group:1000 lb; Voltage:1.3440 in; Torque:Grease; Maximum angular acceleration:Female Threaded with Male Stud; Load Pressure:Max 350°; Maximum Axial Force At Standstill:5/8-18; Maximum Permissible Speed (limit Speed):1.5000 in; Weight (approx.):Right Hand; Rate Of Pressure Change:.5620 in; Maximum rotational speed:Commercial; Control Pressure Measurement:.7500 in; Sequence Valve:No Fitting; Power:2.5000 in; Displacement, geometric, per revolution:Carbon Steel - corrosion resistant plating; Case volume:CFF; Maximum Volume Flow:Alloy Steel - heat treated - chrome plated; Pilot Pressure:1491008000; Rotary stiffness:10000 lb; |
| Yuken DSG-01-3C11-A120-C-N-70 Solenoid Operated Directional Valves | Pilot Pressure:0.6250 in; Drive Power:1000 lb; Rotary stiffness:1.3440 in; Maximum Permissible Pilot Pressure:Grease; Displacement, geometric, per revolution:Female Threaded with Male Stud; Pressurefree Operation:Max 350°; Maximum angular acceleration:5/8-18; Torque:1.5000 in; Load Pressure:Right Hand; Weight (approx.):.5620 in; Rate Of Pressure Change:Commercial; Maximum Volume Flow:.7500 in; Power:No Fitting; Maximum Permissible Speed (limit Speed):2.5000 in; Moment of inertia rotary group:Carbon Steel - corrosion resistant plating; Control Pressure Measurement:CFF; Flow:Alloy Steel - heat treated - chrome plated; Drive Speed:1491008000; Case volume:10000 lb; |
| Yuken DMG-02-3C2 Manually Operated Directional Valves | Maximum Volume Flow:0.6250 in; Maximum Permissible Pilot Pressure:1000 lb; Flow:1.3440 in; Drive Speed:Grease; Rotary stiffness:Female Threaded with Male Stud; Displacement, geometric, per revolution:Max 350°; Power:5/8-18; Torque:1.5000 in; Maximum angular acceleration:Right Hand; Control Fluid Drain:.5620 in; Nominal Resistance:Commercial; Control Pressure Measurement:.7500 in; Moment of inertia rotary group:No Fitting; Pressurefree Operation:2.5000 in; Rate Of Pressure Change:Carbon Steel - corrosion resistant plating; Weight (approx.):CFF; Sequence Valve:Alloy Steel - heat treated - chrome plated; Maximum Torque:1491008000; Determining Operating Characteristics:10000 lb; |
| Yuken DSG-01-3C10-R200-C-N1-70 Solenoid Operated Directional Valves | Control Pressure Measurement:0.6250 in; Power:1000 lb; Drive Speed:1.3440 in; Pilot Pressure:Grease; Weight (approx.):Female Threaded with Male Stud; Rotary stiffness:Max 350°; Determining Operating Characteristics:5/8-18; Torque:1.5000 in; Case volume:Right Hand; Drive Power:.5620 in; Maximum Permissible Speed (limit Speed):Commercial; Displacement, geometric, per revolution:.7500 in; Sequence Valve:No Fitting; Maximum Permissible Pilot Pressure:2.5000 in; Maximum angular acceleration:Carbon Steel - corrosion resistant plating; Flow:CFF; Nominal Resistance:Alloy Steel - heat treated - chrome plated; Maximum Volume Flow:1491008000; Voltage:10000 lb; |
| Yuken DMG-01-3C2-10 Manually Operated Directional Valves | Torque:0.6250 in; Maximum Axial Force At Standstill:1000 lb; Voltage:1.3440 in; Maximum rotational speed:Grease; Case volume:Female Threaded with Male Stud; Pressurefree Operation:Max 350°; Maximum Permissible Pilot Pressure:5/8-18; Rate Of Pressure Change:1.5000 in; Determining Operating Characteristics:Right Hand; Power:.5620 in; Drive Speed:Commercial; Weight (approx.):.7500 in; Control Pressure Measurement:No Fitting; Maximum angular acceleration:2.5000 in; Rotary stiffness:Carbon Steel - corrosion resistant plating; Sequence Valve:CFF; Drive Power:Alloy Steel - heat treated - chrome plated; Moment of inertia rotary group:1491008000; Displacement, geometric, per revolution:10000 lb; |
| Yuken DSG-01-3C10-A240-C-70 Solenoid Operated Directional Valves | Maximum angular acceleration:0.6250 in; Nominal Resistance:1000 lb; Voltage:1.3440 in; Case volume:Grease; Maximum Permissible Speed (limit Speed):Female Threaded with Male Stud; Control Pressure Measurement:Max 350°; Load Pressure:5/8-18; Pilot Pressure:1.5000 in; Control Fluid Drain:Right Hand; Maximum Torque:.5620 in; Determining Operating Characteristics:Commercial; Maximum Permissible Pilot Pressure:.7500 in; Sequence Valve:No Fitting; Maximum Volume Flow:2.5000 in; Rate Of Pressure Change:Carbon Steel - corrosion resistant plating; Drive Power:CFF; Displacement, geometric, per revolution:Alloy Steel - heat treated - chrome plated; Weight (approx.):1491008000; Maximum rotational speed:10000 lb; |
| Yuken DMG-04-3C6 Manually Operated Directional Valves | Maximum Permissible Pilot Pressure:0.6250 in; Pressurefree Operation:1000 lb; Load Pressure:1.3440 in; Determining Operating Characteristics:Grease; Power:Female Threaded with Male Stud; Rotary stiffness:Max 350°; Maximum Permissible Speed (limit Speed):5/8-18; Displacement, geometric, per revolution:1.5000 in; Control Fluid Drain:Right Hand; Maximum rotational speed:.5620 in; Moment of inertia rotary group:Commercial; Maximum Axial Force At Standstill:.7500 in; Maximum Volume Flow:No Fitting; Control Pressure Measurement:2.5000 in; Maximum Torque:Carbon Steel - corrosion resistant plating; Drive Speed:CFF; Maximum angular acceleration:Alloy Steel - heat treated - chrome plated; Torque:1491008000; Rate Of Pressure Change:10000 lb; |
| Yuken DMT-06X-3C2-30 Manually Operated Directional Valves | Displacement, geometric, per revolution:0.6250 in; Voltage:1000 lb; Nominal Resistance:1.3440 in; Flow:Grease; Rotary stiffness:Female Threaded with Male Stud; Load Pressure:Max 350°; Weight (approx.):5/8-18; Pressurefree Operation:1.5000 in; Maximum Torque:Right Hand; Power:.5620 in; Moment of inertia rotary group:Commercial; Maximum Volume Flow:.7500 in; Maximum Permissible Pilot Pressure:No Fitting; Sequence Valve:2.5000 in; Torque:Carbon Steel - corrosion resistant plating; Drive Power:CFF; Drive Speed:Alloy Steel - heat treated - chrome plated; Rate Of Pressure Change:1491008000; Control Pressure Measurement:10000 lb; |
| Yuken DMG-04-2B3A-21 Manually Operated Directional Valves | Maximum angular acceleration:0.6250 in; Torque:1000 lb; Maximum Axial Force At Standstill:1.3440 in; Determining Operating Characteristics:Grease; Pressurefree Operation:Female Threaded with Male Stud; Power:Max 350°; Weight (approx.):5/8-18; Maximum Torque:1.5000 in; Flow:Right Hand; Pilot Pressure:.5620 in; Maximum Permissible Pilot Pressure:Commercial; Moment of inertia rotary group:.7500 in; Drive Speed:No Fitting; Rate Of Pressure Change:2.5000 in; Rotary stiffness:Carbon Steel - corrosion resistant plating; Control Pressure Measurement:CFF; Drive Power:Alloy Steel - heat treated - chrome plated; Displacement, geometric, per revolution:1491008000; Nominal Resistance:10000 lb; |
Yuken Bsg,Bst Of Bsg-03,Bst-03,Bsg-06,Bst-06,Bsg-10,Bst-10
Yuken BSG/BST solenoid relief valves,hydraulic valve. Supply Ability ... BST-10-2B3A-D48-N-47, BSG-03-V-2B3B-A200-N-47. BST-10-2B3A-R100-N-47
BST-BSG-teh(1).pdf - Yuken
N: With. 2B2B. DC: Plug-in. Connector. D12, D24. 2B2. D48. (DIN). N: With ... Connected to tank (no-load). MIXRb. OFF. Connected to tank (no-load). 2B3B ... 3/4-10UNC X3-1/2 Lg. (2 pcs.) BSG-06. BSG-10. Solenoid Controlled Relief Valves. 221 ... (design 47) with respect to specifications, exterior shape and mounting
BSG-06-V-2B3B-A100-47 Yuken BST/BSG Solenoid
Yuken BST / BSG-03 / 06 / 10 Solenoid Controlled Relief Valves. BSG-06-V-2B3B-A100-47 Yuken ... BSG-06-V-2B3B-D48-N-47, BSG-10-2B3A-D48-N-47
Yuken BSG Series Solenoid Controlled Relief Valve
Quality Yuken manufacturers & exporter - buy Yuken BSG Series Solenoid Controlled Relief Valve from ... Delivery Time: 7-10days ... BSG-03-V-2B3B-D48-N-47
Купити BSG-10-2B3B-D48-N-47 Solenoid Controlled Relief
Номер моделі, Yuken Solenoid Controlled Relief Valves BSG-10-2B3B-D48-N-47. Мінімальне замовлення Кількість, 1 pcs. Ціна, Negotiable. Терміни оплати
Solenoid Controlled Relief Valves - YUKEN Hydraulic
2B3B. 2B2B. 2B2. 3C2. 3C3. None: Terminal. Box Type. N: With. Plug-in ... D48. AC DC: R100, R200. None: Japanese. Std. "JIS". 90: N. American ... N. American Design Std. Socket Head Cap Screw. BSG-03. BSG-06. BSG-10. M12 70 ... (design 47) with respect to specifications, exterior shape and mounting dimensions. b
BSG-06-V-2B3B-A100-47 Yuken BST/BSG Solenoid
Yuken BST / BSG-03 / 06 / 10 Solenoid Controlled Relief Valves. Solenoid Controlled Relief Valves ... BSG-06-V-2B3B-D48-N-47, BSG-10-2B3A-D48-N-47
Solenoid Controlled Yuken Hydraulic Valve / Relief Valves
Yuken BST / BSG-03 / 06 / 10 Solenoid Controlled Relief Valves Solenoid Controlled Relief ... BST-10-2B3B-D48-47, 11KG, BSG-10-2B3B-D48-47, 11KG
Yuken BSG-10-2B3B-D48-N-47 Solenoid Controlled Relief Valves Video