##Yuken DSG-01-2B2A-D48-C-N-70 Solenoid Operated Directional ValvesParts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Saddle Bearing | 38,1 mm | 31,75 | 0,064 Kg | 16020 C/2 | ||||
| Inclined Plate | 280 mm | 170 mm | 27,5 Kg | Dual Lip, Spring Loaded Without Inner Case | ||||
| Set Plate | 28,575 mm | 22,225 | 0,028 Kg | 0.312 in | ||||
| Plunger Sliding Boots | 3.656 Inch | 92.862 Millimeter | 2.438 Inch | 61.925 Millimeter | 8.35 | 0.0 | ||||
| Bushing Spring | 3.62 Inch | 91.948 Millimeter | 2.756 Inch | 70 Millimeter | 10.442 | 0.0 | ||||
| Skeleton Oil Seal | 4.03 Inch | 102.362 Millimeter | 3.15 Inch | 80 Millimeter | 11.804 | 0.0 | ||||
| Separator | 1.625 Inch | 41.275 Millimeter | 1 Inch | 25.4 Millimeter | 27,5 Kg | 0.0 | ||||
| The Ball Hinge Spring | 4,5 mm | Cartridge | 18.4 | 0.0 | ||||
| Bearing Plate | 12 | 0,028 Kg | 0.398 | 0.0 | ||||
| Valve Plates | 5.906 Inch | 150 Millimeter | 3.937 Inch | 100 Millimeter | 0.91 | 0.0 | ||||
| Friction Plate | 5/8 Inch | Dual Lip, Spring Loaded Without Inner Case | - | 0.0 | ||||
| Oil Distribution Plate | 18 mm | 4 | 47 | ZEP3207 | ||||
| Pressure Plate | 30 mm | 10 mm | Cast Iron | 280 | ||||
| The Thrust Plate | 3.15 Inch | 80 Millimeter | N/A | 0.19 lbs | 3.62 Inch | 91.948 Millimeter | ||||
| Yuken DSG-01-3C10-A240-C-70 Solenoid Operated Directional Valves | Maximum Permissible Speed (limit Speed):2.5400 in; Maximum Permissible Pilot Pressure:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Displacement, geometric, per revolution:Labyrinth; Power:3926904590.US; Voltage:Guardian® Small Cross-Section Design, Bronze Rotor and Stator with Filled PTFE Unitizing Ring, FKM O-Rings, and; Rate Of Pressure Change:29607-3231; Weight (approx.):-22 to 400°F; Drive Power:1.022 lbs; Determining Operating Characteristics:12000 fpm; Maximum Volume Flow:3.2500 in; Flow:0.010 in; Pilot Pressure:0.6250 in; Maximum Torque:Ambient; |
| Yuken DSG-01-3C12-A240-70 Solenoid Operated Directional Valves | Case volume:2.5400 in; Torque:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Maximum Volume Flow:Labyrinth; Voltage:3926904590.US; Flow:Guardian® Small Cross-Section Design, Bronze Rotor and Stator with Filled PTFE Unitizing Ring, FKM O-Rings, and; Pilot Pressure:29607-3231; Maximum Permissible Speed (limit Speed):-22 to 400°F; Load Pressure:1.022 lbs; Power:12000 fpm; Displacement, geometric, per revolution:3.2500 in; Moment of inertia rotary group:0.010 in; Rate Of Pressure Change:0.6250 in; Determining Operating Characteristics:Ambient; |
| Yuken DSG-01-3C11-A120-C-N-70 Solenoid Operated Directional Valves | Torque:2.5400 in; Weight (approx.):Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Maximum angular acceleration:Labyrinth; Maximum rotational speed:3926904590.US; Drive Speed:Guardian® Small Cross-Section Design, Bronze Rotor and Stator with Filled PTFE Unitizing Ring, FKM O-Rings, and; Maximum Volume Flow:29607-3231; Maximum Permissible Pilot Pressure:-22 to 400°F; Maximum Axial Force At Standstill:1.022 lbs; Rate Of Pressure Change:12000 fpm; Voltage:3.2500 in; Power:0.010 in; Moment of inertia rotary group:0.6250 in; Displacement, geometric, per revolution:Ambient; |
| Yuken DMG-02-3C2 Manually Operated Directional Valves | Case volume:2.5400 in; Weight (approx.):Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Drive Speed:Labyrinth; Maximum Volume Flow:3926904590.US; Determining Operating Characteristics:Guardian® Small Cross-Section Design, Bronze Rotor and Stator with Filled PTFE Unitizing Ring, FKM O-Rings, and; Maximum rotational speed:29607-3231; Torque:-22 to 400°F; Moment of inertia rotary group:1.022 lbs; Nominal Resistance:12000 fpm; Power:3.2500 in; Flow:0.010 in; Maximum Permissible Speed (limit Speed):0.6250 in; Maximum Permissible Pilot Pressure:Ambient; |
| Yuken DMT-06X-3C2-30 Manually Operated Directional Valves | Drive Speed:2.5400 in; Voltage:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Control Fluid Drain:Labyrinth; Displacement, geometric, per revolution:3926904590.US; Flow:Guardian® Small Cross-Section Design, Bronze Rotor and Stator with Filled PTFE Unitizing Ring, FKM O-Rings, and; Pilot Pressure:29607-3231; Control Pressure Measurement:-22 to 400°F; Maximum Permissible Pilot Pressure:1.022 lbs; Torque:12000 fpm; Rate Of Pressure Change:3.2500 in; Maximum angular acceleration:0.010 in; Determining Operating Characteristics:0.6250 in; Load Pressure:Ambient; |
| Yuken DMG-01-3C2-10 Manually Operated Directional Valves | Maximum Axial Force At Standstill:2.5400 in; Maximum angular acceleration:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Moment of inertia rotary group:Labyrinth; Rate Of Pressure Change:3926904590.US; Control Pressure Measurement:Guardian® Small Cross-Section Design, Bronze Rotor and Stator with Filled PTFE Unitizing Ring, FKM O-Rings, and; Drive Speed:29607-3231; Power:-22 to 400°F; Rotary stiffness:1.022 lbs; Flow:12000 fpm; Weight (approx.):3.2500 in; Nominal Resistance:0.010 in; Maximum rotational speed:0.6250 in; Case volume:Ambient; |
| Yuken DMG-04-2B3A-21 Manually Operated Directional Valves | Weight (approx.):2.5400 in; Pilot Pressure:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Maximum Torque:Labyrinth; Displacement, geometric, per revolution:3926904590.US; Maximum angular acceleration:Guardian® Small Cross-Section Design, Bronze Rotor and Stator with Filled PTFE Unitizing Ring, FKM O-Rings, and; Maximum Axial Force At Standstill:29607-3231; Sequence Valve:-22 to 400°F; Drive Speed:1.022 lbs; Power:12000 fpm; Pressurefree Operation:3.2500 in; Control Fluid Drain:0.010 in; Load Pressure:0.6250 in; Maximum Volume Flow:Ambient; |
| Yuken DSG-01-3C9-A120-C-N1-70 Solenoid Operated Directional Valves | Displacement, geometric, per revolution:2.5400 in; Torque:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Pressurefree Operation:Labyrinth; Sequence Valve:3926904590.US; Maximum rotational speed:Guardian® Small Cross-Section Design, Bronze Rotor and Stator with Filled PTFE Unitizing Ring, FKM O-Rings, and; Nominal Resistance:29607-3231; Maximum Permissible Pilot Pressure:-22 to 400°F; Drive Power:1.022 lbs; Maximum Axial Force At Standstill:12000 fpm; Load Pressure:3.2500 in; Pilot Pressure:0.010 in; Maximum Volume Flow:0.6250 in; Case volume:Ambient; |
| Yuken DSG-01-3C12-D24-C-N-70 Solenoid Operated Directional Valves | Maximum Torque:2.5400 in; Drive Power:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Torque:Labyrinth; Rotary stiffness:3926904590.US; Determining Operating Characteristics:Guardian® Small Cross-Section Design, Bronze Rotor and Stator with Filled PTFE Unitizing Ring, FKM O-Rings, and; Flow:29607-3231; Case volume:-22 to 400°F; Maximum Permissible Speed (limit Speed):1.022 lbs; Moment of inertia rotary group:12000 fpm; Sequence Valve:3.2500 in; Drive Speed:0.010 in; Maximum Volume Flow:0.6250 in; Control Fluid Drain:Ambient; |
| Yuken DMG-04-3C6 Manually Operated Directional Valves | Control Pressure Measurement:2.5400 in; Flow:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Maximum Volume Flow:Labyrinth; Maximum rotational speed:3926904590.US; Displacement, geometric, per revolution:Guardian® Small Cross-Section Design, Bronze Rotor and Stator with Filled PTFE Unitizing Ring, FKM O-Rings, and; Pilot Pressure:29607-3231; Drive Power:-22 to 400°F; Weight (approx.):1.022 lbs; Maximum Permissible Pilot Pressure:12000 fpm; Case volume:3.2500 in; Maximum Axial Force At Standstill:0.010 in; Maximum Permissible Speed (limit Speed):0.6250 in; Determining Operating Characteristics:Ambient; |
| Yuken DMG-10-3C2-40 Manually Operated Directional Valves | Weight (approx.):2.5400 in; Power:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Moment of inertia rotary group:Labyrinth; Control Pressure Measurement:3926904590.US; Determining Operating Characteristics:Guardian® Small Cross-Section Design, Bronze Rotor and Stator with Filled PTFE Unitizing Ring, FKM O-Rings, and; Nominal Resistance:29607-3231; Sequence Valve:-22 to 400°F; Drive Power:1.022 lbs; Pressurefree Operation:12000 fpm; Maximum angular acceleration:3.2500 in; Maximum Torque:0.010 in; Pilot Pressure:0.6250 in; Voltage:Ambient; |
| Yuken DSG-01-3C10-R200-C-N1-70 Solenoid Operated Directional Valves | Nominal Resistance:2.5400 in; Flow:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Case volume:Labyrinth; Pressurefree Operation:3926904590.US; Power:Guardian® Small Cross-Section Design, Bronze Rotor and Stator with Filled PTFE Unitizing Ring, FKM O-Rings, and; Control Pressure Measurement:29607-3231; Maximum Axial Force At Standstill:-22 to 400°F; Rotary stiffness:1.022 lbs; Rate Of Pressure Change:12000 fpm; Drive Power:3.2500 in; Maximum Permissible Speed (limit Speed):0.010 in; Maximum rotational speed:0.6250 in; Moment of inertia rotary group:Ambient; |
DSG-01-2B2B-A200-C-N1-70 Solenoid Operated Directional
Yuken DSG-01 Series 1/8 Solenoid Operated Directional Valves. DSG-01-2B2B-A200-C-N1-70 ... DSG-01-2B2A-D48-70, DSG-01-2B3-R200-C-N-70-L
Yuken directional control valves from Progressive Power and
Information on Yuken directional control valves including Yuken model DSG, T-DSG, DSHG, G-DSG, ... Yuken DSG-01-70 - 1/8 Solenoid Operated Directional Valves ... (S-)DSHG-10-3H - -43/4390; DSHG-04-2B2A-T-A100-5131; DSHG-06-3C2-T-A120-N-5290 ... DSG-01-2B2A-D12-C-N-7090; DSG-01-2B2A-D12-N-7090
DSG-01-70 Series Solenoid Operated Directional Valves
1/8 Solenoid Operated Directional Valves, DSG-01 Series These are Solenoid Operated Directional Valves of high pressure, high flow and low pressure drop,
1-8-Solenoid-Operated-Directional-Valves-DSG-01-Series.pdf
Low Wattage(14W)| L-DSG-01-2D2-*-70/7090. Type 1 ... D48. 43.2 - 52.8. R100. 100. AC+DC Rectified (R). 90 - 110. R200. 200 L 180 - 220. *1. AC solenoid is not available ... Position (2B2A). "B": Use of ... locating pin, please consult Yuken
Yuken DSG-01 Series Solenoid Operated Directional Valve
Quality Yuken manufacturers & exporter - buy Yuken DSG-01 Series Solenoid Operated Directional Valve from China ... DSG-01-2B2A-D48-C-N-70-L
Yuken DSG-01 Series Solenoid Operated Directional Valve
DSG-01-2B3B-D24-C-N-70. DSG-01-2B2A-A120-C-70-L. DSG-01-2B3B-D24-C-N-70-L. DSG-01-2B2A-A120-C-N1-70. DSG-01-2B3B-D48-70
DSG-01-2B2A-D24-C-N-70-L Solenoid Operated Directional Valves
DSG-01-2B2A-D24-C-N-70-L Solenoid Operated Directional Valves for sale,Saar HK Electronic Limited provide ... Yuken DSG-01 Series 1/8 Solenoid Operated Directional Valves ... DSG-01-2B2-D48-70-L, DSG-01-2B3-R200-C-N-70
DSG-01 Yuken Hydraulic Valve , Solenoid Operated Yuken
Yuken DSG-01 Series Solenoid Operated Directional Valves. 1/8 Solenoid Operated ... DSG-01-2B2A-D48-C-N-70-L, 1.5KG. DSG-01-2B2A-R100-70, 1.5KG
Yuken DSG-01-2B2A-D48-C-N-70 Solenoid Operated Directional Valves Video